Haris Budiriandi

As for the naked version

Final picture of Project: Alliance

Finally, the Project: Alliance. The name of "Alliance" showed up just because there are quite a lot of hardware brands that I use to work on this project. While for the concept itself I tried to display the case from a panoramic view. To gain a panoramic view, I rotated the orientation of the case, so I could get rid of useless parts of the case.

Project: Alliance full spec:
- Processor: AMD Ryzen 7 5700X
- Motherboard: ASRock B550 Phantom Gaming-ITX/ax
- CPU Cooler: Cooler Master Master Liquid ML240L ARGB White Edition
- GPU: ASRock RX6600 Challenger
- NVME: Acer Predator GM3500 512GB
- RAM: Acer Predator Apollo 2x8GB DDR4
- PSU: Cooler Master V650 Gold v2 White Edition
- Chassis: Cooler Master MasterBox Q500L Sakura Edition

Thank you Cooler Master for the opportunity, see you again in the next #CMWS

While waiting for the paint to dry, I encountered one problem, where the space for the AIO cooler's radiator was very narrow. I tried to replace the fan with a thinner one, and yes, the heat spreader tip of the ram is only 1mm adrift of the fan blade.

Almost done, the final touch for the casing is painting.

Before entering the final stage, there are some details to do, I dismissed the unnecessary holes on the chassis to make it look better.

While waiting for all the parts to be painted, I also made a stand for the front I/O panel

After the process of drawing and laser cutting the material is complete, we enter the process of assembling the laser cutting results to become the base panel and top panel. The material i used is acrylic sheet.

Because aesthetically it is not possible to use the PSU's default cable, so I did a custom for the modular cable to make it more proportional to the condition of the chassis.

After taking measurements, it's time to carry out the mutilation process on the chassis

Last sight before the case was stripped down

Hello everyone, I'm Haris, I'm from Indonesia.

On this occasion, I will modify the MasterBox Q500L Sakura Edition case, the concept itself is quite simple, just continuing the existing trend, namely the collaboration between Cooler Master and ASRock, but in my personal version. Because there are some hardware used in this modification, so I named this project a Alliance.

And this is some hardware that I use for this project

On 12/14/2020 at 7:25 PM, Daguar said:

 

 

Cemungudh kaka...




#menghilang

Goodluck bro...