THE INCREDIBLE HULK

[HULK]

[HULK]

I will be starting with my video card casing. The video card casing will be modded from the ground up. I think I will be the first who ever thought of case modding the video cards. If anybody knows of anybody else please let me know. I will be modding three video card casings, I will utilizing three way SLI.

This is my home made heat strip for bending my fiber glass.

To be continued.....

[HULK]

Now this is just one of the three I would have to mod.

The other two would be identical except the wording, one would have the word "THE"

and the other would have the word "INCREDIBLE"

To be continued.....

[HULK]

This is how the other two video cards will look like

Now I'm going to build the base where the motherboard, Hard drives and SSD's will be placed.

The base will be suspended over the head of the HULK figurines, so there will be pictures

of the base showing one corner of the base open ended. So that a straight steel beam will be

place in that open to betray the HULK lifting the base.

This is the opening for the steel beam.

[pcjunkie209]

This looks interesting. keep up the good work!

[Tortured_soul]

very nice work

wait for updates

[frozensnail]

Love the acrylic work, a passion of mine too, can't wait to see the finished results, n1

[HULK]

Thank You for the comments.

Now I'm going to continue with the base of the case.

This is the steel pole that will be used to hold the base above the hulks head.

Now this is the stand offs for the motherboard.

Half the base will have a lid that will be opened or closed.

The other half will be opened space where the video cards will be placed.

[HULK]

Now I will build one of the sides of the lid. It will have the holes for two 80mm fans.

This is the end face of the lid, where the clamping mechanism will be placed in order to keep lid attached to the base

[HULK]

Now the motherboard I will be using is the ASUS Rampage III Extreme.

In the next few photos i'm going to use the power and reset buttons on the motherboard to

power on my case mod. So I'm going to build a cover to protect from touching any other components.

on the motherboard.

Now the case modded video cards will have to be positioned differently, because since they where

modded with a 1/4" thick fiberglass and i'm going tri-sli. They will not fit on the motherboard.

So I decided to place the cards above the motherboard, above the base lid and I will be using PCI

express extenders in order to accomplish this. In the next few photos I will be building the brackets

that will hold the cards.