Scynd Posted September 10, 2012 Share Posted September 10, 2012 Hi @ all This is my Entry for the Coolermaster 2012 Casemod Competition. I´m going to build a round PMMA Case with many fans on the outside I do all work by myself with my hands. There is no CNC parts or something like this. So, this was my output material. There are two 30cm semi spheres for the main body and twenty 8cm semi spheres for the fans. First step was to cut holes in the two big semi spheres where i can stick the small semi spheres with the fans. Next step: Holes for the small spheres After this, I stick the smaal ones on the big ones. Link to comment Share on other sites More sharing options...
frozensnail Posted September 10, 2012 Share Posted September 10, 2012 Some nice work there, lots of fans, are these to be fitted on each of the cut outs? Link to comment Share on other sites More sharing options...
Scynd Posted September 10, 2012 Author Share Posted September 10, 2012 Right I have painted the fans white and sticked them in small semi spheres. Pictures following soon Link to comment Share on other sites More sharing options...
Tortured_soul Posted September 10, 2012 Share Posted September 10, 2012 woww i liked more more more Link to comment Share on other sites More sharing options...
Scynd Posted September 12, 2012 Author Share Posted September 12, 2012 Thanks! Here are some Pictures from the socket. Link to comment Share on other sites More sharing options...
Scynd Posted September 14, 2012 Author Share Posted September 14, 2012 Hi again here are some Pictures from the 20 LED lights i build. I used three green/orange Duo LED´s per part. I stick the LED ligths on the back of every fan. Link to comment Share on other sites More sharing options...
frozensnail Posted September 14, 2012 Share Posted September 14, 2012 Hey, the fans will look very cool in the sphere, what kind of method are you going to use to mount them? Good work! Link to comment Share on other sites More sharing options...
Scynd Posted September 14, 2012 Author Share Posted September 14, 2012 Hey, the fans will look very cool in the sphere, what kind of method are you going to use to mount them?Good work! THANKS! First I stick the LED lights on the back of the fan. After that I use three 3mm thick PMMA staffs and stick them with Acrifix (PMMA glue) between the fan and the sphere. That´s it Works very well Link to comment Share on other sites More sharing options...
Scynd Posted September 19, 2012 Author Share Posted September 19, 2012 Next steps are the fans and the wires First light test Link to comment Share on other sites More sharing options...
ASPHIAX Posted November 3, 2012 Share Posted November 3, 2012 Looking good man ! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.