TESCO-Zsömle Posted September 10, 2012 Share Posted September 10, 2012 Coming Soon... Link to comment Share on other sites More sharing options...
MACIEL BARRETO Posted September 11, 2012 Share Posted September 11, 2012 I'm waiting for news, big hug. Link to comment Share on other sites More sharing options...
TESCO-Zsömle Posted September 12, 2012 Author Share Posted September 12, 2012 Hi everyone! Here is two shots of my actual HTPC. I'll use this as a donor of the mod. It has an Asus AT3IONT-I Deluxe, which is a fully integrated mITX motherboard. It only need some RAM and a hard drive to work. Even the PSU is integrated. The HTPC's case made of a faulty Denon DCD-715 CD-Player. Cheers. Link to comment Share on other sites More sharing options...
TESCO-Zsömle Posted September 12, 2012 Author Share Posted September 12, 2012 I'm waiting for news, big hug. Thanks dude. I'm really on to this. Link to comment Share on other sites More sharing options...
TESCO-Zsömle Posted September 13, 2012 Author Share Posted September 13, 2012 Missing parts are on their way. Till then, I'm working on the SketchUp model, and getting started with rendering. Below is a small sampling. Link to comment Share on other sites More sharing options...
TESCO-Zsömle Posted November 3, 2012 Author Share Posted November 3, 2012 Sorry for the big break. Borderlands 2 have stolen a big ammount of time. Most of the mod will be as simple as possible. The cooling is mostly for design. It only need to dissipate 50W maximum... This will be the radiator: Because it has a very slim base (3,5mm) I decide to mill the routes in an 8mm thick policarbonate plate that will be screwed to the heatsink. I've made the simpliest design, for remove the air from the water cooling. This will be very important, because the pump is very small: Actually this was one of the big lateers. I just get it one week ago. (Thanks for the customs...) Finally, here is the optical drive. At first I wasn't sure whether to have it but I already knew that only a slot-in version could be an option. Tomorrow I'll start to mill out the policarbonate with a Multi-Tool. I hope it will working. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.