[Tower Mod}"Storm GT" Storm Enforcer Mod

[metaldox]

Hey Guys, I am going to be modding my Storm Enforcer. The Specs are

• i52500K
  Gigabyte GA-Z68X-UD3H-B3
  XFX Radeon HD 6850
  Corsair CX600
  Corsair Vengeance 4GB
  G.Skill 2x4GB 1600Mhz
  Corsair Nova 2 SSD
  Hyper212 Evo

They might change a bit. Also here the mods and things that will be done

1. 
   [*:3vemjbay]Paint The Exterior ( interior maybe )
   [*:3vemjbay]Carbon Fiber the graphics card, psu and some other parts
   [*:3vemjbay]Add more usb ports on the top
   [*:3vemjbay]Add a Window to the Door
   [*:3vemjbay]Add a Fan Controller or Led Controller and Leds ( Still deciding between Sentry 2 with white leds or nzxt hue eventhough it cannot control fans...any advice)
   [*:3vemjbay]Add Fans
   [*:3vemjbay]Sleeve PSU Cables and Case Cables
   [*:3vemjbay]pilot style switch for something maybe the leds if I don't get the hue
   [*:3vemjbay]Need a design to paint for the right side panel.

Any other mod suggestion??

Also I name the project the Storm Gt cuz it is loosly based on modern luxury/sports cars. I will post the current pics and some progress later tonight. The Progess Will be posted a bit fast in the begining because I am copying from another forum

but this is still a WIP.

Table of Contents

[metaldox]

Update Time!!!!

Current Pics

I know the cable management is messed up a bit, but it will be fixed once I paint it and rebuild the case

The Good Part

Striping the keyboard

A Naked Keyboard

Now to put back the keys

WAah! Where did these many parts come from

Leds cut out

Clothing the keyboard

Final Pics

That's it for now. Next I will be doing my Graphics Card and mouse. So stay tuned for that

[metaldox]

A Minor Update

I finished my graphics card and this is a ton of work and 2x the amount of cleaning adds to that. Anyways here we go :

One Part Done

The holes in the back, man these were tough

Phew! done

Side almost done

Fully Done

Final Pics

Stay tuned for more :-)

[metaldox]

Update Time

So I started painting and it is still not done, i started just by doing the small parts first.

Now the Pics

World's best painting booth

Some of the parts

Note: these already have been scuffed

Primed Parts

Painted in Red

I will wetsanding these later

Now the mouse

Orignal Pics

Disassembled

Now to trim all this

Final Pics

Thats it for now. I had a question, where should I buy the plexiglass/acrylic for the front window? I might also make psu cover so what should I use to make it and how do I make it? Any Ideas or suggestions?

[metaldox]

The really really delayed update, due to several reasons, one of them being, hitting the back button on my mouse for the past half in hour while trying to type this, but thats not what we are here for, are we?

Current Pics

From the top, you can see the red showing from the tape, and yes I did the red but no wip shots unfortunatly but you guys will the product soon.

Closer Shot of the red

Front Shots with the miss spray

If you are wondering whats the tape for, two reasons mainly, re painting the black to look more glossy and hide the overspray, and the other being hide the red

Now priming the pieces

I also did my side panel

It is not very good because the paint started to peel, and even sanding and repainting left a few patches on it so i will be repainting it tommorow, while I clear all this stuff. Dont worry this is not over yet, I will be editing this post in about an hour with painting done pics, and tommorow I will be clear coating all this once I come back from my first day of School.

i also have a package coming from coolermaster soon

[metaldox]

new

Here we go again

Side Panel Fixed

Front Panel

Sleeving

A Few Glamour Shots