Jim Weist Posted October 20, 2014 Author Share Posted October 20, 2014 preeeety awesome thank you! Link to comment Share on other sites More sharing options...
Jim Weist Posted December 10, 2014 Author Share Posted December 10, 2014 Hey everyone!! First off I want to apologize for such a long delay in updates here on the forums, it is not my style. I have been crazy busy with client work and I also had some trouble getting my videos edited from a guy who was gonna help me, in any event I am back editing myself and gonna get things done. One big thing that changed is I got a new job and I can no longer spend half my day on the computer browsing forums and editing videos. That really put a kink in my flow for documenting my modding. I'm going to do my best to continue with consistent updates, I have to dedicate about a full day to editing video and updating forums and that is an entire day of free time out of my workshop progressing. But it needs to be done. What I have today is bringing you up to speed on the case where I am, I have a handful of pics and a few videos! I finally dialed in the bezels which has been eating at me for months now, 2 other designs failed and the CNC came to the rescue. Then I made my door panels and replaced the top panel to match the font on the doors! I want to quickly thank my sponsors, you guys are seriously awesome, so supportive, and understanding. Now on with the work! Here is the new bezel design I finally ran with. Very happy with the outcome! The rear bezel will be completed when I get all the cables to extend to the motherboard and graphics I/O. I will then make a white acrylic panel custom with all the PC input and output connections. Now on with the door panels and top panel. Front door is engraved with Clockwerk Case Mods. The rear top panel is made to be a giant periodic table block for copper and the bottom panel is Cyprus29 the name of the build! I think it fits the theme well! =D It may not look like much but these 3 videos here would make up a few hundred photos =D I am continuing the same way as before where the videos represent all the work to make these completion photos. I hope you enjoy! Well that's all for now, I hope to have 2 more updates and then the final photos. My goal was to finish by the end of the year but I am not 100% sure I can make that happen. I am going to try my best though. For those wanting more frequent updates check my Clockwerk Case Mods facebook page, I post my daily work there! Thanks again see ya soon! Link to comment Share on other sites More sharing options...
Pclinde Posted December 14, 2014 Share Posted December 14, 2014 Nice video updates. Link to comment Share on other sites More sharing options...
Jim Weist Posted December 14, 2014 Author Share Posted December 14, 2014 Nice video updates. Thank you!! Link to comment Share on other sites More sharing options...
CM Glenn Posted December 23, 2014 Share Posted December 23, 2014 Nice job! I also really like the video. Keep up the awesome work! Link to comment Share on other sites More sharing options...
Jim Weist Posted March 5, 2015 Author Share Posted March 5, 2015 Nice job! I also really like the video. Keep up the awesome work! Thanks! More on the way. This Fan Zone stuff is super difficult to log on to. Sorry for the super late response. Trying to keep up on videos, I also have a video for a client build Im doing for a Cooler Master HAF932. I could really use a plug to my youtube channel on some social media if anyone can help that would be awesome =D Link to comment Share on other sites More sharing options...
Jim Weist Posted March 5, 2015 Author Share Posted March 5, 2015 Title [Cyprus 29] CM Stacker : Update 3/1/15 : Rear Panel, RAM, MB! Update [x] Update 15 : March 1st : Rear Panel, MB and RAM Hey everyone! I apologize for the lengthy delay in updates! Clockwerk Case Mods has really picked up on client work and as someone trying to grow as a business I cannot turn away these jobs. One being a full case mod I am still plugging away on Cyprus29 every chance I get though. I am now basically done with the outside of the case and working on finishing up the components and dialing in the interior of the top case. I have new reservoir designs as well now that the CNC is in full swing. I will probably have one more update before my final update! Before I go any further I want to that the awesome companies supporting this project! Without you guys this would not be possible! You have all been so supportive and understanding! I am currently working on a new project watermark and converting it to the theme of the build I only have 3 out of the 6 done so far but I will hopefully have it done by next update. I also hope to have this build done in the coming weeks. First thing on my agenda was wrapping up the outside panels of the case. I have a few more little trim pieces to add to the bottom case as I changed the pattern on the top and ran out of them. I was waiting on getting to McMaster Carr to pick up more of the ¼†acrylic stock so I started on the interior of the case modding the last of the hardware. All that is left now is one GPU block. First I did the motherboard shroud then I did the memory. These components were pretty popular when I shared them on twitter I wasn’t expecting all the awesome feedback, but it sure is a motivating feeling! Here is a few shots to give you an idea of the layout! Now per usual here are the video updates I have on the progress I made! I hope you enjoy them! Next on my agenda is cutting a new motherboard tray on my CNC with wire mgmt. installed. I also have a new design for both my reservoirs. The top is a dual tube reservoir and the bottom is a channel style reservoir. I will have that in the next update which will hopefully be in only a couple weeks! I am luck to also have understanding clients and they know that his is an important project to me and I can take a little time to work on it. Here are the videos! The rear panel video. Motherboard and RAM. I want to thank you all again for tuning in to the build and I will be back soon to get this guy wrapped up!! Link to comment Share on other sites More sharing options...
Jim Weist Posted July 25, 2015 Author Share Posted July 25, 2015 Hey everyone just wanted to check in and let everyone know Cyprus is about to wrap up very soon here! Im officially going to be leaving my job to mod full time, Im so backed up with client work I can't keep up and that was my personal goal to get to before I made this move and its going to happen! August 14th is my last day of work and Clockwerk Computer Modification will be my full time job! Ill have so much more time to focus on videos for YouTube, and update projects regularly, and get my official website finally established and working! I also have an a big project coming upright after Cyprus29 Ill announce soon as its released of NDA. I hope to have another Cyprus29 update a week after I leave my job because Ill be on Cyprus for a few hours daily then. Client work during the day then have personal project time every day which im extremely excited for! Anyways I will talk to you all very soon I just wanted to fill you all in and thanks to everyone who has helped me and shown support, my hard work and dream is coming to fruition and I wouldnt be able to do what I am doing without the love and support! Cheers!! Link to comment Share on other sites More sharing options...
Jim Weist Posted November 17, 2015 Author Share Posted November 17, 2015 Alright guys! I can't believe how long its been since I updated my forums for this project. I was waiting and waiting to get time to edit a video but I just never was able to get to it, the build is far from dead and I am getting close to the final weeks until completion. If you have been following my work on social media you have seen this already. I have just been so buried in client work that 2 months ago many people know I left my job and started modding for clients full time, at first it was slow and I was very unorganized but now I have my schedule dialed in and the orders are picking up and things are going well! It was a tough choice but it was worth the pay cut now to be able to do what I love every day all day. Now I have time to work on my own builds and was also able to take on the responsibility of judging the MSI Pro Mod Season 3 which required a demo build from the judges. I still haven't had time to set aside for video editing, that is what I plan to work in to my routine next. For now I have a handful of pictures to share. I began the final assembly and final paint, I am working my way from the bottom up dialing in the final touches. The Checklist to Completion looks like this: {1} Top case front bezel reservoir mod - Like the one you will see in this update for the bottom case. {2} Liquid channel panel top case floor panel with I/O - It will serve as a channel panel with the IO build in. {3} Sleeve pump and SSDs with pass through holes through the bottom case midpanel. {4} The panel mount wiring for MB, CPU, and GPU atx cables. {5} Custom fan enclosures and painting. {6} Route and sleeve all loose LED and Fan wires. {7} Install the 1ft IO jumpers from MB and GPU to my own custom rear IO plate. {8} Install Copper tubing and fill the loop. There is not much left at all, about a total of 30 to 40 hours of labor I hope to finish by the end of this month. Well lets move on to the update I have. I am only going with 15 pictures because some forums this build is on are limited with the pictures per post for some reason. You can find more photos on my Facebook page for Clockwerk Computer Modification. I will post up another update next week, and then, then a final update the following week, with final photos a few days after that! Alright first thanks to my sponsors on this wild ride, their patience and their support is like none other, I was never once rushed or felt stressed, they have all been very supportive in my following my dream and never pressured me. Cheers to them. Without them this wouldn't of been possible! I will start form the ground up! First modding the Case Feet, I wanted to make them even bigger and beefier than they already were! So I added copper painted acrylic inserts! A trick I learned recently is decanning spray paint, you make an spout for your paint can and spray it in a jar or cup and then you can either thin it for the air brush or spray from a spray gun. Working my way up the case I made the mounting cut out for the power supply as well as a custom 3d printed 90 to add to my custom power jumper that will feed to the custom IO rear plate to my custom power cable I made. Lots of custom lol. Here is the 90 adapter. I am also building up the build with my new case cube model 3d printed with abs. It works just as well as the aluminum and I am using my build to show their capability. It will be available for sale at Overkill-PCs in the very near future! Here is the custom power cable I made, held together with custom copper cable combs made from 1/8" plate copper. And here is the bottom case basically complete, need to run wires for the pump and SSDs yet. I also made a new bezel design with a custom reservoir built in as well as running the copper bar theme like the sides and back of the case. Well in order to keep from complicating my other forum posts and double posting Im going to wrap this up here, I have time planned this week to get some major hours in on this build and push to wrap it up. I want to get the bottom case totally finished with wires and all, the front bezel on the top case, and the liquid channel panel, so the final update will be just wires and water tubing. The wire layout I have planned I haven't seen in a mod yet so I am really excited to show everyone! Thanks for watching and stay tuned its almost there!! Link to comment Share on other sites More sharing options...
Pclinde Posted November 19, 2015 Share Posted November 19, 2015 The custom power cable. Damn! That's some die-hard modding action! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.