sangyzan Posted July 9, 2014 Share Posted July 9, 2014 Hello everyone, I would like to start this new project, I have seen on the net and in this forum that there are already many (all fantastic and crazy) but I'd like to have something that occurrence can be closed to make space for another place and maybe even in the wall of the living room where the TV is.Let's start with these pictures, they are not very good at drawing, this is only a draft, during the phase of the project `'ll decide how to proceed.The fixed points are: folding desk fixed to the wall with support for keyboard and mouse attachment. A big thank to all my sponsors who are helping me with this project Specs: Cpu: Intel i7-4790Motherbord: Asus Maximus VII ImpactVga: ASUS GeForce GTX 750 Ti OCRam: Kingston HyperX Fury memory 8gbSSD: HyperX 3K SSD 120gbSSD: Samsung 840 Evo 1TbPsu: Enermax Revolution XT 730W Gold 80 plusKeyboard: Corsair K70 RedMouse RapooMonitor: Samsung F6400 FHD 3D 40" Watercooling:EK-HDC Fitting 12mm G1/4 - Black NickelEK-HD Adapter 10/12mm - NickelEK-AF Angled 45° G1/4 NickelEK-AF Angled 90° G1/4 NickelEK-Supremacy EVO Copper PlexiEK-D5 Vario (12V DC Pump)TUBE PrimoChill PrimoFlex™ Advanced LRT™ 12,7 / 9,5mm - Crystal Clear RETAIL 3mEK-HD Tube 10/12mm 500mm (2 pcs)EK-Ekoolant UV Lime GREEN (premix 1000mL)EK-RES X3 250EK-XTOP D5 PWM PlexiEK-D5 Cover Kit (Nikel)Cooler Master Nepton 280L RadiatoreCooler Master JetFlow 140mm 2Enermax T.B Apollish Blue 6 ventole tips are welcome, thanks Link to comment Share on other sites More sharing options...
sangyzan Posted July 10, 2014 Author Share Posted July 10, 2014 Hello everyone, today I took the chipboard panels and I cut the most important parts. These will be the supports of the desk.... This panel will set the side fan ...... 3 will be on one side and 3 on the other side this is how it goes on the bottom panel and placed the hardware Today it's all ...... stay tuned Link to comment Share on other sites More sharing options...
sangyzan Posted July 12, 2014 Author Share Posted July 12, 2014 Good morning, work continues ........ I cut the holes in the side panels where they will attach the 120mm fans and "probable" radiators (if any sponsor wants to help would be welcome ). this is the magazine of the keyboard and mouse Link to comment Share on other sites More sharing options...
sangyzan Posted July 12, 2014 Author Share Posted July 12, 2014 cutting the front panel for keyboard compartment stay tuned..... Link to comment Share on other sites More sharing options...
sangyzan Posted July 13, 2014 Author Share Posted July 13, 2014 I proceed with the slots dimension 5.25 DVD writer and the other ...... Link to comment Share on other sites More sharing options...
sangyzan Posted July 16, 2014 Author Share Posted July 16, 2014 Hello everyone, I cut the rear panel to support the motherboard and power supply ...... the screws will change ...... temporary power supply Stay Tuned Link to comment Share on other sites More sharing options...
sangyzan Posted July 23, 2014 Author Share Posted July 23, 2014 hello to all, work continues......sorry if some pictures are not visible but the phone sometimes does not work well Link to comment Share on other sites More sharing options...
sangyzan Posted July 24, 2014 Author Share Posted July 24, 2014 Link to comment Share on other sites More sharing options...
sangyzan Posted July 24, 2014 Author Share Posted July 24, 2014 Stay Tuned Link to comment Share on other sites More sharing options...
sangyzan Posted July 24, 2014 Author Share Posted July 24, 2014 Cut the top panel to glass mesh for cooling fans and here it is attached to the wall ok guys what do you think? are in half the work. there still so much to do ..... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.