sangyzan Posted February 8, 2015 Author Share Posted February 8, 2015 Hello guys, I rebuilt the front faceplate to measure, will be applied where the start button and USB ports .... it is still to be finished ..... see you soon Link to comment Share on other sites More sharing options...
sangyzan Posted February 11, 2015 Author Share Posted February 11, 2015 Hello Folks, I continued with a little work.I reinforced the front panel with plexiglass 5mm so as not to have problems with the insertion in the USB ports and I put a LED as light ignition and gave a first coat of paint.I entered the plexiglass panels on the sides of the cover feeder, I gave a pretty smooth at all and I also painted this last, then I gave a first coat of paint also to the houses so that attacks well PS...sorry for my bad english Stay Tuned Link to comment Share on other sites More sharing options...
sangyzan Posted February 13, 2015 Author Share Posted February 13, 2015 Hello everyone, I plugged in the side profiles even in the back of the case and started to build the front panel .... See you soon Link to comment Share on other sites More sharing options...
MonsterMawd Posted February 16, 2015 Share Posted February 16, 2015 nice job on the hand cuts! Link to comment Share on other sites More sharing options...
sangyzan Posted February 17, 2015 Author Share Posted February 17, 2015 nice job on the hand cuts! Thank you very much :-) Link to comment Share on other sites More sharing options...
sangyzan Posted February 17, 2015 Author Share Posted February 17, 2015 Sponsor AvexirHuge thanks to AVEXIR for supporting me with these wonderful memory that will be part of the project http://www.avexir.com/product/blitz/blitz.html Thank you very much :-) Stay Tuned :-) Link to comment Share on other sites More sharing options...
sangyzan Posted February 18, 2015 Author Share Posted February 18, 2015 Hello guys,ok, I have continued to shape the front panel and have also created the thicknesses in plexigalss to make it more rigid and have a more cute.... Stay Tuned Link to comment Share on other sites More sharing options...
sangyzan Posted February 20, 2015 Author Share Posted February 20, 2015 Hello everyone,I created a sort of design in the upper front panel that surrounds the logo cooler master, following reservation will be illuminated.I painted the front panel and the thicknesses and I started building the side panels, plexiglass is been covered in cling film darkening...... See you Soon Link to comment Share on other sites More sharing options...
sangyzan Posted February 25, 2015 Author Share Posted February 25, 2015 Hello everyone,I finished the front panel, I added new feet, I put the LEDs on the sides of the radiator to illuminate the front panel, I repainted somewhere ...... Stay Tuned Link to comment Share on other sites More sharing options...
Lanto Posted February 26, 2015 Share Posted February 26, 2015 Great start. I also recognize your work, and will, check back for more progress. I have noticed you comment on most post's good to see mnpctech has the close bussiness feel by still getting involved with modders Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.