seinron Posted January 27, 2015 Share Posted January 27, 2015 Hi guys welcome on my new thread. Hardware Specs: Case: Cooler Master Cosmos II MB: MSI Z97 GAMING 9 Series CPU: 4790K RAM: 8GB Gskill RIPJAWS1600MHz GPU: MSI Geforce GTX 770 2GB PSU: Cooler Master V1200 SSD: Samsung EVO 250GB I'd like to thank Cooler Master and MSI for sponsoring this mod with a: MSI Z97 GAMING 9 series, MSI Geforce GTX 770, Cosmos II, a V1200 psu and a bunch of JetFlo white LED fans. Thank you very much for that! Before modding test of the hardware : It doesn't look sexy now... but it's fully functional. Work on the motherboard, I've used a 1.5mm thick Aluminium plate whith many Holes to made a mainboard Cover : All the holes are finished, time to remove the plastic film : Link to comment Share on other sites More sharing options...
seinron Posted January 27, 2015 Author Share Posted January 27, 2015 Addded three layers of black mat paint on the cover : Link to comment Share on other sites More sharing options...
seinron Posted January 28, 2015 Author Share Posted January 28, 2015 Time to modify the mainboard heatsinks, before the southbrige : And then the CPÜ powerphase : Link to comment Share on other sites More sharing options...
seinron Posted January 28, 2015 Author Share Posted January 28, 2015 The case @Stock : The final will be .... different ! Link to comment Share on other sites More sharing options...
seinron Posted January 28, 2015 Author Share Posted January 28, 2015 The case after few hours : the new middle plate in place : Link to comment Share on other sites More sharing options...
seinron Posted January 31, 2015 Author Share Posted January 31, 2015 A new Front : Link to comment Share on other sites More sharing options...
seinron Posted February 3, 2015 Author Share Posted February 3, 2015 New rear : Link to comment Share on other sites More sharing options...
RebellionNL Posted February 3, 2015 Share Posted February 3, 2015 Wow! that looks great, but 1 question, what did u have for between motherboard, and the alu plate ? and wouldnt it be a risk because of the heat ? Link to comment Share on other sites More sharing options...
ELSknutson Posted February 4, 2015 Share Posted February 4, 2015 What are you using to cut your acrylic? I am doing a Humvee Build and I ordered an Asus Maximus Impact that I want to do the same Mod that you did to it. also what are you using to keep the sheet off of the board? Link to comment Share on other sites More sharing options...
seinron Posted February 8, 2015 Author Share Posted February 8, 2015 Wow! that looks great, but 1 question, what did u have for between motherboard, and the alu plate ? and wouldnt it be a risk because of the heat ? Thank you there are some brace under the alu plate. Absolutely no problem whith the heat What are you using to cut your acrylic? I am doing a Humvee Build and I ordered an Asus Maximus Impact that I want to do the same Mod that you did to it. also what are you using to keep the sheet off of the board? I use an hegner multicut 1 to cut acrilyc / alu / steel Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.