Jump to content

Project Cube - X (completed)


Arcis Modz

Recommended Posts

Introduction:

 

Hi Guys,

First of all, I'm Andrew Lee Adanza. I've been a pc enthusiast for just about a 2 years or so. Building a gaming rig was only my goal at that time. But as time/months passed by, my love for PC grew. That is the time when i was hooked up to modding. Right now, i'm in a foreign land and it is hard for me to grab all tools and materials to do modding since im still not familiar in this country. Anyways, I will stop this nonsense and proceed with my build log.  :D

 

I've already seen and followed some epic system builds and project logs creating a case using acrylic. some of these are wallmounted pc's like LORAMENTUM and some build using PARVUM like Darthbeavis, l3p, kier etc. This guys inspire me. so now, I will be creating a case with the idea of a case made of acrylic like PARVUM but with inline loops(coolant will pass in the case itself, like LORAMENTUM). If my work comes out half as good as other "masterpiece". It would be a great achievement for me. 
 
All cuts are done using a scrollsaw and by hand. hoping to have my own laser cutter to ease the work.  ;)

 

I would also like to take this chance to say thanks to all of the sponsors.
 
BitFenix-Logo-Large-300x294.png
 
Thanks BITFENIX for sponsoring this build.
Special thanks to BitFenix Malaysia and Clement for all the help.
 
 
D133%20Corsair.jpg
 
Thanks CORSAIR for sponsoring this build.
Special thanks to Corsair Malaysia, Emily and Anson for all the help.
 
Thank you guys.
 
 
Intel-logo.jpg
 
I would also like to give thanks to Intel and Intel Malaysia for helping me on this build.
Thanks a lot guys.
 
 
And to my wallet.  :D  :P  :lol:  ^_^
EmptyWallet.jpg
hehehehehehe....


If you want to see our upcoming projects, you can visit

https://www.facebook.com/arcismodz

Thanks

 
 

======================================================

 

Hardware List:

 

Below is the list of parts/hardwares to be used in this build.

 

Specs:
CPU: I7 4790K - ✓
MoBo: Asus Z97i - Plus - ✓
RAM: Dominator Platinum 2400mhz - 2 x 8gb - ✓
GPU: GTX 760 - ✓ (to follow, all budget for GPU goes down the drain with all the tools and materials needed for this build.) :D:)
HDD: WD 500gb - ✓
SSD: Corsair Neutron 240gb
PSU: Corsair AX760 - ✓
 
Water Cooling:
CPU Block: EK Supremacy CPU Block Nickel Plexy -  âœ“
GPU Block: EK FC670/760 -  âœ“
Rad: Black Ice GT Stealth 240 XFlow Rad -  âœ“
Pump: EK DCP 4.0 Pump -  âœ“
Reservoir: D65 x L170mm RES -  âœ“
Fittings: Compression Fitting -  âœ“
Fittings: 45 Degree Adapter -  âœ“
Fittings: 90 Degree Adapter -  âœ“
Flex Tube: Primochill Advanced LRT Tube -  âœ“
Coolant: Mayhem Pastel Green/Mayhem Blue Dye/Mayhem UV Green-Yellow Dye - custom color -  âœ“
 
MODS and Misc:
Fans 1: CM JetFlo 120 2pcs -  âœ“
Fans 2: CM XtraFlo 12CM 2pcs  -  âœ“
Led Lights: BitFenix Alchemy LED Strips(white) -  âœ“
Sleeved Extension Cables: BitFenix Alchemy Cables -  âœ“
Corsair Lightbar Kit
 
 
 
 
Hardware Photos:
11055283_10205212418042637_6261107099672
 
11046590_10205212418402646_5111744362686
 
 
11058421_10205212418722654_1950707005423
 
11061658_10205212419122664_5395087665497
 
10547424_10205212419402671_6287469980554
 
10989151_10205212419602676_2349846892132
 
11044551_10205212420002686_7084243785938
 
11060962_10205212420202691_4057297412268
 
11061662_10205212420442697_5687954130832
 
11061338_10205212420722704_6558277102022
 
11038122_10205212421002711_1325570057005
 
11044569_10205212421322719_7207541461915
 
11054462_10205212422402746_6783345815935
 
11051948_10205212423042762_5939528148036
 
10408525_10205212423482773_8814267618397
 
 
Box Photos:
10271554_10204926698979839_3434678861025
 
551495_10204926698619830_175856794114597
 
10383633_10204926698179819_5326227991495
 
10385312_10204926697659806_8354129252984
 
1526755_10204926697179794_16669385109409
 
10952585_10204926696819785_7595658810911
 
10929951_10204926696459776_3574372539283
 
 
 
Hardware testing/my current setup
10891518_10204571976992011_8132540011947
Link to comment
Share on other sites

  • Replies 58
  • Created
  • Last Reply

thanks man... im happy you like it... will continue doing this next weekend. :)

I like the unique ones like this. Like, I have never seen the liquid cooling actually being PART of the case. :o

 

My project isn't so unique. But I think it may be the smallest: http://community.coolermaster.com/index.php/topic/12436-monocase-v10-high-end-gaming-pc-in-the-size-of-a-ps4/

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..