LordPamya Posted February 2, 2015 Share Posted February 2, 2015 Hi All crazy and pro modders, I would like to show my first project to everyone, I have seen many awesome DeskMod builds on the internet and forums, However I wanted to build something very special for my office. I want people to be able to see it from all sides. Also, wanted proper cable management done specially at the back side of the table as that's what people see when the enter my work-space. Specification: CPU: AMD FX-8350 CPU Cooler: Corsair Hydro Series™ H60 High Performance Liquid CPU Cooler CPU Cooler FAN: CoolerMaster XtraFlo 120 Red LED Motherboard: Asus M5A99FX PRO R2.0 GPU: SAPPHIRE HD 7950 3GB GDDR5 RAM: G.SKILL Sniper 8GB (2 x 4GB) DDR3 SSD: Intel® SSD 330 Series (60GB, SATA 6Gb/s) HDD: WD Green 1TB Optical Drive: LG 24x DVD RW± PSU: Corsair VS650W Keyboard: Logitech Internet Pro Y-SZ4 Mouse: Razer DeathAdder Black MousePad: Razer Goliathus Small Control Monitor: Benq 24 inch Full HD Monitor G2412HD and SONY 32 inch Full HD BRAVIA NX520 LCD TV Modding: Deepcool Rockmaster 3.0 Fan Controller Modding: NZXT HUE RGB LED Controller Modding: Deepcool XFan Red LED 120mm Sponsors: GPU: Nvidia GTX 980 Strix Mobo: SABERTOOTH 990FX R2.0 - ASUS Mouse: Kone Pure Mouse Pad: Taito 3mm Mini RAM: G.SKILL Sniper 8GB (2 x 4GB) DDR3 SSD: G.SKILL Phoenix Pro Series 120GB PSU: DQ750 Quanta Modding: Deepcool Rockmaster 3.0 Fan Controller Modding: Deepcool XFan Red LED 120mm [Converted to Green] It's time for some photos! I regret for the low quality phone photo’s.. they were taken for build log inside my house. Please check my build and let me know your thoughts on the same. Looking forward for feedback and suggestions. · We started with basic sketch on white paper to finalized dimension of Desk. · After finalizing dimension on the paper, we started work on ply. · Base mount for Motherboard, PSU and HDD · 120mm FAN size cutting to ply for best cooling · Testing cutting ply for fitting with old CPU components · Painting job · Final fitting initiated · Final component fitting · Top and Front surface fitting · L/R Side and back side grill and painting · Top, Front, drawer flap, Side and Back grill fitting · Top base of desk like car bonnet · Red Acrylic cutting for front switch and inside Link to comment Share on other sites More sharing options...
LordPamya Posted February 2, 2015 Author Share Posted February 2, 2015 The final desk completed in red theme {Legs still under construction] Link to comment Share on other sites More sharing options...
LordPamya Posted March 30, 2015 Author Share Posted March 30, 2015 Red theme was made for AMD, however Nvidia is sponsoring so I'm going to change Red theme to NV Green/Black. Link to comment Share on other sites More sharing options...
LordPamya Posted March 30, 2015 Author Share Posted March 30, 2015 · Started working on Base · Changing Red Leds to green Link to comment Share on other sites More sharing options...
LordPamya Posted March 30, 2015 Author Share Posted March 30, 2015 · Changing Blue LED fan to Green of DeepCool Quanta 750w PSU · Changing White Desk to Black · Etching done for sponsors Link to comment Share on other sites More sharing options...
LordPamya Posted March 30, 2015 Author Share Posted March 30, 2015 · Working on Base Cover · Red Acrylic changed to Black · Base cover fitting · Sponsors Components Link to comment Share on other sites More sharing options...
LordPamya Posted March 30, 2015 Author Share Posted March 30, 2015 · And it's Done Thank you for looking my build. I want say special thanks to all my sponsors, friends and my Family for support. It was not possible without your support. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.