Jump to content

Recommended Posts

So, time to end the contest less and less.

 

Today I'll show you one of the hallmarks of my modding project. How did Ken Block in the car, I use in my scratch build a real carbon fiber! Not film, not laminitsiyu, present 2mm thick carbon fiber! The plans were engraved, but as long as it will not be.

0_180055_87b564ab_XXXL.jpg

0_18004a_425e059e_XXXL.jpg

0_180048_da28f6fb_XXXL.jpg

0_180049_173a62b9_XXXL.jpg

0_18004b_d32c8622_XXXL.jpg

 

Also, I came to the details carved into the laser alloy of magnesium and aluminum (AMg5) with a thickness of 2.5 mm

 

Front panel with holder

0_180057_4454e3d1_XXXL.jpg

 

Bottom

0_180058_5bf1c2b1_XXXL.jpg

 

Back panel

0_18004c_c8bac777_XXXL.jpg

 

Top panels. On one of them will stay watercooling radiator

0_18004d_12425613_XXXL.jpg

 

The average wall and holders for HDD and SSD

0_18004e_e4d53846_XXXL.jpg

 

"Gills" and carved brackets

0_18004f_1701dd49_XXXL.jpg

 

This item will be a support for the handle housing. It is made of duralumin on CNC machines

0_180056_42d97a3e_XXXL.jpg

 

The project will be used ISO 7380 M3 bolts of stainless steel and high-strength varying lengths

0_180051_a666b7d7_XXXL.jpg

0_180052_8575020b_XXXL.jpg

0_180050_bfa67c84_XXXL.jpg

 

And it's not sand - is powder paint for the frame. Color chose the catalog closest to the color wheel on the [HOONICORN]

0_180053_fb45d421_XXXL.jpg

 

If you think that the real carbon and fog machine - the most interesting things in this project - you are wrong - the most interesting thing to come!

Ready to Rock!

Link to post
Share on other sites

Top panels and radiator are mounted on spacers. I made them by hand from L-shaped aluminum corner. Now I want to tell you how to make a strong thread in aluminum, using special threaded rivets. How does this rivet can be seen in the previous report. She is standing on a sheet of carbon

 

I do holder.

0_180e71_83b7859c_XXXL.jpg

I increase the hole to 5.2 mm (M3 thread)

0_180e72_e9e07d5_XXXL.jpg

I reams shallow drill holes 8mm shallow

0_180e73_d8eede93_XXXL.jpg

Try on. This is not the best hole in the frame to get a lot better

0_180e75_22581bbb_XXXL.jpg

Need a special Riveter

0_180e77_af443e3e_XXXL.jpg

Spun rivet

0_180e79_73efe590_XXXL.jpg

Puts in place

0_180e7a_ad8c0938_XXXL.jpg

Pull and outcome.

0_180e7b_79bffc55_XXXL.jpg

0_180e7c_79be94ba_XXXL.jpg

 

Also from the L-shaped corner I was made brackets for doing the motherboard tray. The two of them grew stronger conventional rivets to the rear panel.

0_180e7d_3d83d48c_XXXL.jpg

There are all top brackets

0_180e7e_6e816eba_XXXL.jpg

And for mb tray

0_180e7f_42ceebd4_XXXL.jpg

Fold the holders HDD and SSD, and gills

0_180e80_d744da0d_XXXL.jpg

0_180e81_10b933bc_XXXL.jpg

The frame is ready. Bottom to attach to it using bolts and rivets.

0_180e82_5efba97b_XXXL.jpg

0_180e83_d32d8866_XXXL.jpg

0_180e84_b104409c_XXXL.jpg

0_180e85_b84fcfa1_XXXL.jpg

0_180e87_9266f2ac_XXXL.jpg

0_180e88_969fc526_XXXL.jpg

Link to post
Share on other sites

As I promised, interesting things of my project:

 

1) Headlight. Yes, yes, inside mITX case. Not from the Mustang, but also the classic car! These lights are put on the VAZ 2121 Niva, Vaz 2001. Lights of the same size (170mm diameter) is also set to MB Gelendwagen, VW Golf 2 and other cars, including the Mustang.

0_181bc8_74846ff0_XXXL.jpg

0_181bc7_af5bc91c_XXXL.jpg

0_181bc6_c7f7d571_XXXL.jpg

 

 

VAZ 2121 NIVA

0_181bc5_d8c22487_XXXL.jpg

0_181bc4_debeca0_orig.jpg

 

The cartridge and the LED for illumination

0_181bc9_5527388a_XXXL.jpg

 

2)Carrying handle made of solid duralumin. I wanted to do it in the style of the control knob on the handbrake drift - cars. 

Not by car of Ken, but as Vaughn Gittin Jr.'s Mustang RTR 2015 Spec 5.

http://www.speedhunters.com/2014/11/2015-ford-mustang-rtr-spec-5/

0_181bcd_775f3637_XXXL.jpg

0_181bcc_a0f14593_XXXL.jpg

0_181bcb_36515a8b_XXXL.jpg

0_181bca_39f23d77_XXXL.jpg

 

 

Source of inspiration

0_181bd5_f7795326_XXXL.jpg

0_181bd4_c742c64d_XXXL.jpg

 

The handle holder will be in the form of a spring, then with the handle it will look like suspension push-rod.

0_181bcf_477a4110_XXXL.jpg

0_181bce_99355662_XXXL.jpg

 

Stickers

0_181bd3_dc15bad6_XXXL.jpg

 

Carbon sheet cut into CNC MILLING of the desired size.

0_181bd1_1365a35b_XXXL.jpg

0_181bd0_25f89d0b_XXXL.jpg

 

The other side, it is clear that this is a real carbon

0_181bd2_7d9f772_XXXL.jpg

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..