Jump to content

Bulldozer project - AMD Tribute


Ilija Dakic

Recommended Posts

  • Replies 49
  • Created
  • Last Reply

Starting to look good! Good luck with the next steps. :)

Tnx man, here is the update :D

 

Ok, i know it has been a good long while since i last posted but i am happy to inform you that i am contiunuing my work and that i cleared another year in my faculty :D studying came first to this... sorry :(
 
I took few of these at local shop here in Serbia ( Uradi sam / Do it yourself ) 
 
2n6djb4.jpg
 
I cut them to lenght and i made new tracks... 
 
b3llxy.jpg
( mind the dog, she is dangerous ) :D
 
2621afq.jpg
2lygdh.jpg
2s9en1t.jpg
2j644uc.jpg
6posy9.jpg
 
I figured out how to make the windscreen the way i want it to be, also spoon is done tomorrow when i take the rear suspension from Fiat Punto
 
There is a bit more update some stuff came last week from AquaTuning :) 
 
2lub80.jpg
2zz6d0z.jpg
2nkv12s.jpg
34ql2f7.jpg
 
Tomorrow i will make ubber update!!! I kept you in the dark for far too long :)
Link to post
Share on other sites
Ok, i got few pics of progress and a question :D

 

svos9e.jpg

3bitv.jpg

 

The spoon will be simmilar to this but i will str18 it a bit, add some mesh on top, make it more robust with stirofoam and such... it will look really good with suspensions and all painted ;) trust me, i have it in my head!!!

 

Also  there is a question regarding these two pictures below

 

11w8vbq.jpg

1oakps.jpg

 

Should i make mud protector on the 2nd pic, or should i leave it like it is on the 1st? 

Please post coments on what you think i should do and what you like/dislike on it...

 

Tnx, Bax!

Link to post
Share on other sites
I made a compromis with mud flaps and went llike this, i think you will like it :D 

 

2v2aaep.jpg

seuemf.jpg

51rq6w.jpg

23ifakk.jpg

hs16af.jpg

 

And the demonstration of power!!! :D 

Just for you to see how sturdy this thing really is... ( also to mention i am 192cm tall )

 

2vwsl5x.jpg

359z6e8.jpg

 

I hope you can gasp the sheer size of this thing :D

At some point i will make it battery operated and i will drive on top of it XD 

Link to post
Share on other sites
Peeps, i know pictures are awful but my camera bateries ran out :( so i had to use my camcorder.

 

fd51s4.jpg

112hcu8.jpg

2mpzej6.jpg

2zialj5.jpg

1zoke81.jpg

x4ol78.jpg

 

I know most of you will criticize my choice to go for wood instead of alu but i had my own good reasons :) 

 

Also as you can see, my suspensions came and i am super happy about it :) Deatails almost complete and i hope that tomorrow i will finish complete body and start painting it hehe

Link to post
Share on other sites
  • 3 weeks later...
 here is an update after a big long while

 

I fixed the doors so they can open correctly now and i had to make them open up top because of clearance issues :/

 

This is first layer of acrylic filler

2s7ffw5.jpg

2ryllyf.jpg

j0d26h.jpg

a9lffs.jpg

 

This is 2nd, and there might be a tird to fill the smallest holes :)

mt9kj9.jpg

Link to post
Share on other sites
I've got some stuff inside of the case just to check how everything fits and looks in the cabin :D 

 

s183sy.jpg

iygdnm.jpg

10ejuqh.jpg

2r2lwty.jpg

2wh1g6u.jpg

5uog2w.jpg

izwyhk.jpg

sgqp3s.jpg

dff0h5.jpg

sxbuvo.jpg

 

I hope you like the overall look inside the cabin :) its a bit tight but I like it like that :) only main ssd's will be inside the cabin, hard drives will go under the entire thing, and under that, radiators, pumps etc :D

 

Its nearing the end and the start of painting :) i cant show you enough how that makes me feel :D

 

Also a small adition to everything :) i fixed my speakers that i will be using and i will be also replacing the monitor with 40" 4k display :D

2i7747t.jpg

Link to post
Share on other sites
  • 2 weeks later...

Wow, that thing looks awesome! Can't wait to see what it looks like when it's finished :D

 

Tnx man, and stay tuned :D 

 

A few more days left, I will finish the mod before August :D 
 
As i didnt want to post pictures that make no sence, posting pictures where only i could see the difference, i waited a bit and once i had done things i deem'd made a change, i made a little walktrough around what i have done and around the case... 
The video is a bit on the longer side, and i got a bit confused with terminology i would be thrilled if you'd watch it :)
 
 
I will grab some batteries for my camera and that is one of the reasons i used camcorder now, and i will take some nice closeups tomorrow, also i will most likely put primer on the drawer piece :)
Link to post
Share on other sites
UPDATE!!!, still not painting :( ran in to some work related issues :P but still sort of big update :)

 

1)  The "Nose job":

 

fuzuo.jpg

jqn6mr.jpg

1nzo6u.jpg

9hkjyc.jpg

287htea.jpg

33067x1.jpg

r2vqyv.jpg

 

2)  FINALLY! Fan mount... 

 

2j0idlh.jpg

adey39.jpg

rs53f9.jpg

nqfcz.jpg

2z6v6mo.jpg

 

3) Polyester filler :

 

2aeynwk.jpg 

Hole for 24-pin done old fashion little plate style with |-type screws :D

 

72pu1u.jpg

mw47c7.jpg

309t4s7.jpg

 

It still needs sanding before painting, i corrected the edges and everything on the bodywork of the core part, i got fittings, and i did a hole for 24-pin

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..