Jump to content

Project TwinForceTower


Themitichris

Recommended Posts

Hello to all, here I am back with a new project, very different from my standard made-scale "reduced"

as the PSPC (computer inside a PS1) and the newcomer, the cub8 (mini-ITX case that I upset the inside to mount a 240mm AIO).

I also take this opportunity to say that the project will take inspiration from my current PC, to which I gave a touch of elegance that was missing, Kathrine.

 

rMr9zsT.png

 

TfT, the name of the new project, to which the name refers to the two "towers" on the sides of the case.

 

Here are some render illustrating what I want to do.

 

XUJkmSW.jpg

mtnC5Be.jpg

TzQqTs5.jpg

 

Sponsor: 

SeYBPhD.jpg

u74Feh0.jpg

qc7W5Dr.jpg

vavSJro.jpg

 

 

Config:

 

Case: Cooler Master Trooper

Fan: 9x Cooler Master Silencio 120

PSU: Cooler Master v850

CPU: i7 3770K

Motherboard: MSI Z77A-GD55

Ram: Transcend AXERAM 16GB 2400Mhz

VGA: R9 290 Hybrid Air/Watercooled

SSD: 2x Transcend SSD370S 128GB

Cable: ModdingStylez Silver/Grey/Black / Coolforce by Nanoxia

 

Liquid cooling:

WB CPU: XSPC RayStorm

WB VGA: EK thermosphere

Pump / Reseivor: XPSC 750

Tubes: Coolforce by Nanoxia

Fittings: Coolforce by Nanoxia

Liquid: Coolforce by Nanoxia

Radiators: 2x 360 60mm

 

The changes that I will do, as you can very well be noted:

-double Radiator 360 push / pull

-Motherboard Rotated 90 ° with I/O on top

-MidPlate Ad-hoc

-Colours Main Black / Silver

-Sleeve Of all cables

 

Thanks for the attention :)

------

Pending the arrival of the latest components, I begin to introduce the new SSD's flagship home Transcend, the SSD370S.

 

Some features:

Metal body (Hence the "S" placed at the end of the classical model SSD370)

Capacity from 32GB to 1TB

SATA III 6Gb/s

b7ij4AE.jpg

DDVHxgK.jpg

CX64pC3.jpg

 

BIG ENTRY:

CoolerMaster!

Thanks again Alex for giving me this wonderful product of CM's House .

Let's start off with the fans, the Silencio FP 120.

 

qf7chFE.jpg

p0udBHR.jpg

yYwLZQu.jpg

 

AAAH, my favorite.

 

CM STORM MECH

 

Complete of I/O inputs 3.0, aluminum, mechanical, fully backlit,  fully programmable!

Love at first sight!

 

q7jbfgV.jpg

T84juk7.jpg

zF24b9L.jpg

 

Another pearl Cooler Master, the mouse Reaper! Although it is part of the Aluminium Series characterized backed aluminum

 

QBOYbJH.jpg

L9Dm1qA.jpg

nD1U6JE.jpg

 

Ultimate accessory CM, Pulse-R. The last component of the Aluminium Series

There comes a cable with volume control in line to connect our devices to our Headset.

The LEDs (Yes, has led) are powered by the USB port.

The microphone is removable.

 

z8WMKUK.jpg

1r2HIoG.jpg

bsYQxDd.jpg

--------------------

 

Here arrived directly from Germany leads the good Matthias
RPhil8c.jpg
CYXgzwX.jpg
bGVtOV5.jpg
2sUvKNw.jpg
iXRufpW.jpg
TkeA9KG.jpg
uBoRdCe.jpg
4uMnDcb.jpg
UYGQGzB.jpg
RoJiEuM.jpg
 
The quality is impressive, the cables are very rigid and socks are always clean.

------------------

 

Now it starts to get serious guys!
 
I removed all the screws conceivable in the case and that is the proceeds
 
GznAxQ3.jpg
 
Finding myself the skeleton of the Trooper with his nice handle to the frame of the case
 
LuLaR0D.jpg
lMxSSEs.jpg
 
3 rivets on each side and two other brackets with 4 rivets hold firmly this tool almost essential.
 
6kODWsk.jpg
 
Proceeding with disassembly ...
 
AoymnzT.jpg
 
Also outside the front wall containing the box for HDD and ODD cage
 
nS3hyvx.jpg
 
Finding myself in this situation
 
lsFBQDR.jpg
 
Here's what I find myself at the end of the day.
 
0c5tSBt.jpg
Link to comment
Share on other sites

--------------------

Substantial updates guys!

After dismantling the houses have begun to take steps to turn the Motherboard plate

bhNnoox.jpg

And with some work of grinder here is the panel take shape to position the motherboard.

TU0XCDa.jpg

MlPMRQx.jpg

Later I got two minimum brackets from the front block to position the radiator

bwQMZ1H.jpg

Simple, clean and effective.

ZmezRan.jpg

Here's what the case now

GtCdbOa.jpg

And here, in brackets ultimate (I served with corners cut to size), the new "front".

sFOJVPw.jpg

With its panel

A3qMfJY.jpg

nF97eFI.jpg

lFjc4Nw.jpg

e5sk7vA.jpg

uwRBIct.jpg

Let me know what you think, it is important for me to have a feedback from you :)

---------------------------

Work is under way ..

I also drilled the plate behind creating the bracket for the second radiator 360.

Subsequently, an L-shaped bracket du serving me I blocked the plate the motherboard to the rest of the case

33jY0Hc.jpg

k7uyEyC.jpg

FfR6RcV.jpg

Kt5WvZr.jpg

4RjQ3aN.jpg

QwsnjZv.jpg

LKQ7Jli.jpg

QoLQCoF.jpg

G6NOSoo.jpg

ObEnO94.jpg

cGrLI3Y.jpg

RGj401k.jpg

---------------

Update Worklog!

Serving me a sheet of zinc courtesy of a carpenter friend of my father: D I have stretched the background that will later-wrapped.

I also started to draw prospective slots for SSD.

uv6q7Sy.jpg

Now I have made this, a cover PSU plywood 4mm, is the first time that I enter into a carpentry work :D and since I'm used to with Frex,, you can well understand the smell of wood floors that has spread in the room :lol:

Despite everything, serving me some angular always in wood, came out just like I wanted it!

I am satisfied :cooldude:

vDPSmMI.jpg

Run-through

oDbFSzA.jpg

4Yzdx7q.jpg

BNW95q5.jpg

hdDhkey.jpg

7D5cr2N.jpg

Wood filler and the holes are gone!

frvJWOR.jpg

See you next time!

---------------------------

New updates:

nUjJgQ6.jpg

I created a second bracket, built primarily for two purposes, in addition to further stiffen the structure: Bring midplate to "level" and supporting a second bracket that you will see later

Bi46Pko.jpg

zKPgpfo.jpg

Later I began to place the SSD in place

K7z1uNW.jpg

Under the midplate, took into account the dimensions of the tank / pump and power supply, I placed a cage for HDD slide (probably taken from some pre-assembled)

EYzH6ez.jpg

Serving me a bracket made from a profile "L" I raised the cage to allow the HDD to enter and exit without hitting the houses

htACcg0.jpg

Rehearsal (That will clamp removed, the angle must be adapted to the tank / pump)

YisCgH6.jpg

Finally, these are the supports for the SSD viewed from behind: Two bolts M3 holding the SSD retainer to a sheet of 4mm plexy which in turn is held by two other M3 bolts that hold it to the latch plate of the mobo. It is also backlit by a white LED that "separates" in a sense from the background.

pcc2MHN.jpg

2KHOVRr.jpg

Any defects in the cuts will be covered by the film which will play all the "background"

[imghttp://i.imgur.com/He8DpNx.jpg

Preview leds

KLhPg8T.jpg

JLsdeFF.jpg

o8owAPh.jpg

b4Ly6R6.jpg

URORqQA.jpg

4oz2cry.jpg

See you next time!

Link to comment
Share on other sites

------------------------------

Sorry for the long wait, but in addition to the expected new SLR (What I was crazy) I had many commitments.

Return to us!

Stavo pensando di creare una griglia per il radiatore ed è uscita questa:

2nDZFNs.jpg

I do not know yet if I'll put, I've got used to this plexy two days

Later, after taking the hand with inventor I created this:

0sQo5H7.jpg

And you say: "What?" (To put it clean :lol: )

Here it is mounted after doing sheet:

rf6AyU7.jpg

(Then it will be colored black)

Overview mounted cables and motherboard of "evidence" more decent :D

v3JqCkJ.jpg

0DLBsLj.jpg

R1kmPbe.jpg

Also I'm also planning to put the stickers mainly on midplate but that will eventually be scattered everywhere:

SNBYNQ9.jpg

AS8CQ9D.jpg

Tell me what you think,

See you next time!

Link to comment
Share on other sites

----------------------------

The UP that everyone was waiting for!

After combining a bit of disgust.gif' alt=':disgust:'>,

LBSnZlr.jpg

I finally settled all corners and visible rivets that were ruining the bad plate.

dUoHGWm.jpg

Using endless amounts of sandpaper

1zISXtb.jpg

X1Ztk86.jpg

w6Y1Pq2.jpg

pDDYxoq.jpg

Then I finally started to place fittings creating provisionally the final loop (Then of course I will have to remove all of the color)

lpHxUmA.jpg

dR9ZzkT.jpg

Pending / video cards leave a tube that runs good area where surely will drop the remaining tubes

oHvX7S2.jpg

After that I also start to place the tubes

Ps7oeYp.jpg

vxqZwIq.jpg

svWzAaK.jpg

This is love:

ziSHdjM.jpg

Second attempt to bend the rigid pipe (The first was released a mixture of sagging accompanied by a bubble because of phono on at maximum asd)

CKaW8m0.jpg

Tubes placed

puhw6Bt.jpg

bHQw7yx.jpg

Other shortcuts

MzOXErI.jpg

Small overview

OzgghfV.jpg

--------------------

UP

After the arrival of the video card (A 7950) I finally finished the loop, the pictures, you judgment :)

MXJGGHQ.jpg

QFWTc0g.jpg

I also created a "fullcover" for the thermosphere

zDMCL3c.jpg

faBGvEI.jpg

zrp00NI.jpg

wDtuCU2.jpg

x1wYG11.jpg

XiS0ncf.jpg

And instead this is the current situation of the main PC haha

IHQr30B.jpg

------------------------------

cgJALyq.jpg

hlbKlNY.jpg

xMdORwj.jpg

QGKzip8.jpg

iv7hOxm.jpg

LEZcXJB.jpg

9ycRMVl.jpg

VnoqK3y.jpg

aVJsd99.jpg

c9shshT.jpg

or2oNAf.jpg

b0YhTtn.jpg

Tell me what do you think ;)

Link to comment
Share on other sites

---------------------------

Hi guys, here I am back after a lot of time!

After the base color I started to decorate a little around the case with the wonderful stickers made in Germany by ModdingStylez, incredible quality!

-I Have plugged the hole for the dock on the front panel with a 4-port USB hub.

-I Created a counter to run cables from the motherboard to the side, so that they are visible (at least from my perspective)

Without another word I leave you to the photos, let me know what you think!

N2M8dHR.jpg

SgAgTJ6.jpg

1M4na1g.jpg

zBDRn5t.jpg

ZjmHyFC.jpg

KSnAWkZ.jpg

nECC8wa.jpg

LlorBnE.jpg

VEWKtmJ.jpg

zPAen0Q.jpg

AKRBWcO.jpg

KaYwf0h.jpg

VXfjkmK.jpg

lRHyLfE.jpg

zxVEU6h.jpg

-----------------------------

Finally I am back! After modding dedicated to the saint, here is a sink Reference fullcover become a theme!

k4bM0FNh.jpg

CAb8nkwh.jpg

DL2sACdh.jpg

KOL7D4Hh.jpg

1ewYrOsh.jpgKOL7D4Hh.jpgqCVGorzh.jpg

GplWB7Ch.jpg

Then mom Transcend provided me these beautiful ram aXeRam that match perfectly with the rest of the project! Here are some pictures:kJ31EkWh.jpgNQ9Xtjih.jpgOSreNIth.jpgkJ31EkWh.jpg9tGHTcuh.jpgMF7UEIzh.jpgyTkHCUZh.jpgspDRHr4h.jpgyfEvVINh.jpg7Kie0Bph.jpgTUzUTouh.jpg

Link to comment
Share on other sites

-------------------------------------

First of all I thank my sponsors for their support given to me, in alphabetical order:

Cooler Master,soprattutto un grazie a @CM_Alex !

CoolForce by Nanoxia, grazie a Martin!

ModdingStylez, grazie a Matthias!

Transcend, grazie a Matteo!

And finally, thanks to all to have supported me and recommended improvements to the project!

Here's the TfT complete and completed!

Gpfhwbr.jpg

HDJzKhw.jpg

SGk87jY.jpg

Qb83VZU.jpg

8NDXxY9.jpg

IUjeBYs.jpg

nxfqzxf.jpg

bYUCvX6.jpg

aEwp2Wb.jpg

fJ3kngh.jpg

JFQiK5W.jpg

A1ItO7R.jpg

APpnAf3.jpg

27saEM0.jpg

jICYn0U.jpg

9aVWn9v.jpg

ZIyJy4N.jpg

hfmqxKK.jpg

7DlNCXX.jpg

KWTBZVG.jpg

hCwWXNX.jpg

eZcYluM.jpg

OnUoqxa.jpg

cdDToHj.jpg

aqFVitm.jpg

8PkOhfl.jpg

Tbwy3nf.jpg

Bo4LdP1.jpg

gQCCab4.jpg

6pCyA7G.jpg

N11mf0T.jpg

kNVr1uz.jpg

mRvMT1i.jpg

0Gukvnn.jpg

Uw4L7to.jpg

lZvf8Sj.jpg

hGXzuWt.jpg

NJivuch.jpg

R10WwM5.jpg

8SR4eWt.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..