capten Posted March 1, 2016 Author Share Posted March 1, 2016 go on. As always, nothing went according to plan, but what would life be if everything works always. XD So, at first I have to R9 NANO Gpu Cooler installed with backplate. For that I had to cut from 5mm to 3mm spacers this I have attached with superglue Now I was able to AMD R9 Nano disassembled then everything properly cleaned applied thermal pads and paste After that, everything is screwed together and forgot to take a picture. xD The PCIe cable had to be edited so you can not see the cut ends, I cut an end cap of a Satakabel and it glued As a back panel as I had at first described times, a completely white acrylic panel, which indeed 0.5cm was too small. I've recently completed a in the right size but ordered the wrong color chosen. That was frosted glass. So surely it should remain in to the small disk. But fate sometimes do not want to play. Shortly after I had laboriously polished all cut edges, I wanted the screw a little wide. This course went well in the first 3s but the fourth did not want to. wonderful, all the work for nothing, so I had to take the frosted glass, as the case next week to go back to Cooler Master again. As you can see in the photos later this decision was not so wrong. So here now polished the edges again and set all screw holes. Here is the chaos from behind! But sense this photo is the Chrome rim on the front which I already had So the wait is over! Here are finally the finals Images! First, a few glances around the Case Yes unbelievable but the Windows is on it Some stickers are not for everyone, but you know this is a Showcase which is taken next year on several events and there it is advantageous from a distance and each side to see what it is here. Oh I forgot to mention. The CPU-holder and the lid I've at some point painted white and the CPU-screws black. White lighting I've also thrown in a remote control with dimmer. Relatively cheaper than a handsome Switch so and here the insights into the deep heart of DWARF! :-)I hereby wish you all a very merry Christmas, happy holidays and a Happy New Year Link to comment Share on other sites More sharing options...
MonsterMawd Posted March 2, 2016 Share Posted March 2, 2016 Nice work, I really like the Mastercase in White! Link to comment Share on other sites More sharing options...
Nick Farquharson Posted April 9, 2016 Share Posted April 9, 2016 Great build! and a lot of the thoughts I have had for my project case also. I'm sure this won't be the last time I read this thread..... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.