Jump to content

WD EXO (Complete) by Willy Dijo


Willy Dijo

Recommended Posts

WD EXO

 

This build is a personal project that was designed to fit my components while keeping size to a minimum.

 

KdSFXEu.png

uXN49F5.png

usFFCJQ.png

THpCgpt.png

cWrsGxg.png

6PLR2In.png

so4lNvm.jpg

 

 

Instagram @WillyDijo for my next scratch build progression.

 

 

Details

 

The entire case is made out of 3mm and 5mm thick aluminium. The systems dimensions are approximately 440mmH x 440mmL x 170mmW (155mm internal width). Orange is my favourite colour so it only made sense to have this orange themed. I really like having the motherboard rotated this way, it eliminates any GPU sag as well as gets a nice look at your expensive GPU without potential dust settling on it like the upside-down ATX configuration. This orientation is also the most optimal for the GPU's temperature, because the GTX 690 exhausts equal heat out both ends and there are no conflicting air paths. The cases construction took roughly a month to complete. every modification in this case was done with hand tools, only machine being drill press.

 

Hardware Specs

 

   Intel i5 4690k

 

   MSI B85 G43 Gaming

 

   GTX 690

 

   16GB Hyper X RAM

 

   Corsair H100i GTX Cooler

 

   EVGA 750W G2

 

   120GB SSD + 1TB HDD

 

 

Progression

 

________________________________________________________________________________________

 

 

 

KldiMt7.jpg

4.2mm holes for a m5 thread

N9dmI1H.jpg

6mm holes for the corner braces

UHQyt3t.jpg

happy with the fit

g1R9rfP.jpg

 

JsLsCmQ.png

The case is coloured the same as my car, Orange being my favourite colour.

n2IMXKF.jpg

HDD brace Mocked up.

4WakC7Q.jpg

Front intake fan mount

KfQ7nPT.jpg

 

nLxtKdX.jpg

Rear 240mm radiator mount.

hHULSJj.jpg

 

rR1tET5.jpg

 

LkuSK1B.jpg?1

 

iEkgZyc.jpg?1

This is a space efficient design, although anything looks minimal beside the 900D.

Xe65tQI.jpg?1

Love the look of the ThermalTake RGB Riing fans, best part is they can be turned off.

zvnKZHO.jpg?1

the motherboard is mounted directly to the vertical bars via 12mm standoffs

wwt0lGk.jpg?1

system test fitted before painting

kjFaSqQ.jpg

3mm clear acrylic side panels cut to shape

nKes4KG.jpg?1

the whole system disassembled for painting

eVuqQfy.jpg?2

not ideal for painting but it worked better than expected

L6bd3uY.jpg?2

 

e74Rou3.jpg?1

 

7Lzbdh4.jpg?1

Cable sleeving is a tedious task

QXGveSZ.jpg?1

But the results make it worth it

KdSFXEu.png

 

Final result

 

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..