Jump to content

KAM - the wall mounted PC


Marinus

Recommended Posts

Hy to everyone! My name is Marin and I'm from Croatia.
 

The purpose of the KAM project is to design living space thematically. The Computer will be set on the uniqely constructed wall.
Theme of the KAM project is ancient, but at the same time sc-fi, which is the reason why this design has specific and unique look.


This is my first bigger and more serious project. I am a self-taught so almost every technique I used, I used it for the first time. Due to financial reasons I did not have the best tools possible, but I did my best to make most of  the tools I had.

 

I wasn't (financially) supported by any firm so all material was bought on my own expense. Considering I am still a student I hope this could also bring me some professional commentary on my work and help me get the free artist title. 


 Take a look on a FB profile
To do list:
 
1. Make a  rusty, 30 years old table saw work. :)
post-103886-0-87557600-1462654044_thumb.jpgpost-103886-0-03029500-1462689246_thumb.jpg

 
Link to post
Share on other sites
  • Replies 25
  • Created
  • Last Reply

I had a lot of work to do so i didn't have time to upload photos. 
Next fase is cutting styrofoam and fixing to a plywood. 

Concept of wall.


post-103886-0-44958200-1463601364_thumb.jpg

I use 5 cm depth styroam for a wall decoration. 

post-103886-0-96455000-1463598542_thumb.jpg

Here I'am cutting one of the wall decorations

post-103886-0-43233500-1463598557_thumb.jpg  post-103886-0-57861100-1463598563_thumb.jpg

post-103886-0-77274700-1463598577_thumb.jpg

post-103886-0-62172600-1463598550_thumb.jpg

post-103886-0-11994500-1463598570_thumb.jpg

post-103886-0-69448500-1463599289_thumb.jpg
post-103886-0-00406300-1463599298_thumb.jpg
post-103886-0-81003300-1463599293_thumb.jpg
post-103886-0-98747700-1463599301_thumb.jpg
post-103886-0-70116000-1463599307_thumb.jpg
post-103886-0-94599600-1463599311_thumb.jpg

post-103886-0-91185700-1463598585_thumb.jpg

post-103886-0-19058900-1463598591_thumb.jpg

Stay tuned! :)

Link to post
Share on other sites

I need first to cut every element of styrofoam to set correctly on plywood before gluing.

post-103886-0-92880700-1464115909_thumb.jpg

This is a left side of "chamber"
post-103886-0-10385600-1464116145_thumb.jpg

Before and after

post-103886-0-43802800-1464115915_thumb.jpgpost-103886-0-36499800-1464115926_thumb.jpg
post-103886-0-00906200-1464115921_thumb.jpg




tomorow goal is to make a wooden case.

post-103886-0-29172200-1464117010_thumb.jpg


Stay tuned ;)

 

Link to post
Share on other sites

first base of top is done, after that I made flange for pvc pipes

post-103886-0-85367500-1464819785_thumb.jpg
post-103886-0-32946800-1464819789_thumb.jpg
post-103886-0-04748900-1464819793_thumb.jpg
post-103886-0-85720700-1464819796_thumb.jpg
post-103886-0-19476300-1464819800_thumb.jpg

Cutting plywood for outsides of hexagon. 

post-103886-0-33238100-1464820206_thumb.jpg
post-103886-0-60779900-1464820209_thumb.jpg
post-103886-0-12168400-1464820213_thumb.jpg

Bottom view for fan panel. 

post-103886-0-47676500-1464820216_thumb.jpg

post-103886-0-15580700-1464820220_thumb.jpg

Drawing a blueprint for a wall control board.

I will use this control panel for turning on PC, for fan speed controlling, and turning on lights in my room. 
Material: Plywood


post-103886-0-75871900-1464820715_thumb.jpg
post-103886-0-20766600-1464820719_thumb.jpg
post-103886-0-52438000-1464820722_thumb.jpg

Next  step: do the metal effect with polyester putty 


Stay tuned ^^

 

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..