Mickeeboi Posted November 7, 2016 Posted November 7, 2016 Hi my Name is Mickee from the Philippines, Cooler Master PH recently launched a PC modding shodown and I was lucky enough to be 1 of the 4 modders who got invited so I will be modding alongside my idols in the local scene (Jesse Palacio, Mhike Samsin and DJ Madrid). The challenge for each modder is to come up with a theme that Filipinos are known for. So this one is mine, something that I've had a first hand experience of either listening to the noise barrage of neighbors or singing your heart out under the heavy influence of alcohol. The videoke machine is mostly present in almost any celebration that Filipinos have thus project "Luha" which is the Filipino word for tears. I will update this worklog with the full specs a soon as they are available for now we have the Mastercase 5 to work on Unboxing the Mastercase First thing that I would like to change with the case is the orientation of the motherboard tray. Flipped it 90 degrees to the right or left? i don't know I've always had problems with left and right Drilled two new holes and used a couple of thumb screws to secure the top mount then an additional custom panel out of 3mm thick acrylic for the top part and screwed the rest of the rear I/O. For the bottom part I screwed in a piece of tubular bar and used a couple of u channel aluminum to act as clips. I think it is good enough to hold the set up now brown cat is checking for quality As for paint I will mostly use cream white so I started off with the covers of the case handle. Those are all for now, I will be back really soon!
Mickeeboi Posted January 9, 2017 Author Posted January 9, 2017 Updates Side panel window Front Panel PC hardware We are going to use the Masterliquid 92 for this project, lovin' the form factor of this AIO Liquid Cooler Motherboard and GPU from MSI Philippines GSkil RAM and SSD Back to the set up I was able to sleeve a Thermaltake SFX PSU. Mounted a Filipino inspired shield for the Masterliquid 92, air flow is still good as I have dedicated enough clearance for the fans to breath air also I changed the orientation of the fans so that it pushes hot air towards the back of the shield. Back side Mounted the goodies in the case More Filipino Inspired decals for the case, yes they are Tattoo patterns Those are all for now, I will be back with the final photos Have a great day everyone!
-=SpH!Nx=- Posted January 10, 2017 Posted January 10, 2017 You like teasing, don't you? Pretty awesome job bayot! Show us the final photos already and stop teasing!
Recommended Posts
Archived
This topic is now archived and is closed to further replies.