Evgen Posted February 24, 2017 Author Share Posted February 24, 2017 Today was very long day. After driling holes I did it with file in few hours to good condition (on picture it's already clean, without sawdust) Then I painted holes in dark brown and did mounting holes for all units. And fixed units on. I used metall bars for fans (also they work like filters). I planned to use DeepCool fans with blue led there (on picture), but it was noisy. So, I replaced it back to Arctic F8 funs. Try to build and run the PC. There are some defects over the system control unit. I'll fix it before final build. Link to comment Share on other sites More sharing options...
Evgen Posted February 25, 2017 Author Share Posted February 25, 2017 I like that fans Link to comment Share on other sites More sharing options...
Bob Lindall Posted February 25, 2017 Share Posted February 25, 2017 That is an elegant and outstanding computer you have there. Excellent job, good sir. Link to comment Share on other sites More sharing options...
Evgen Posted February 27, 2017 Author Share Posted February 27, 2017 On 26.02.2017 at 1:49 AM, Bob Lindall said: That is an elegant and outstanding computer you have there. Excellent job, good sir. Thank you very much, Bob! I hope, it realy is Link to comment Share on other sites More sharing options...
Evgen Posted March 1, 2017 Author Share Posted March 1, 2017 I have the new raiser! So, I can start final building. In the first, I dismount all units I did it, because there was problem with power supply cooling. I need make some ventilation for it. After filing and painting I covered that hole with metall bar. Ventilation is ready. Link to comment Share on other sites More sharing options...
Evgen Posted March 5, 2017 Author Share Posted March 5, 2017 I was busy few days, but now I can continue my project works. I build my PC back, with riser yet. Also there is green LED, which installed under graphics card. I had trouble with that riser: there was noise from another units of the system. Graphics card worked bad. So, I wrapped it with aluminium foil. Now it works good But I'll find a good brand-name riser for future. Well, it's my gtx 1060 fixed on. Finally, I can connect my second display and see my system nearly done! Green LEd means nVidea, blue LED means Intel Also, my power supply has fan with blue LED, therefore its ventilation looks interesting too. I like my results. There is not so many work before ending yet: I should fix some staff and hid cables (video and power), and my project will done. Link to comment Share on other sites More sharing options...
Evgen Posted March 12, 2017 Author Share Posted March 12, 2017 My last stage is cables, I need to hid it. I fixed power sockets unit under the table (on rear support). And fixed all cables on rear side. Well, it's done! Now I have only two cables to the table: one power cable and one hdmi-cable from PC to TV-panel. Also, I added one more HDD for information and sorted out cables a litle. There are two USB hubs: 2.0 on display stand, and 3.0 on front panel. Also, there are Wi-Fi and BlueTooth USB adapters, plugged in mobo. So, I need to open PC only for dust cleaning (or for the upgrade ). With that classic chair, my own work place is done! Thank you for attention, friends! Hope, you like my renewed wooden PC desk too! Link to comment Share on other sites More sharing options...
VALKYRIE Posted March 12, 2017 Share Posted March 12, 2017 Nice and tidy design! well done Link to comment Share on other sites More sharing options...
Evgen Posted March 13, 2017 Author Share Posted March 13, 2017 10 hours ago, VALKYRIE said: Nice and tidy design! well done Thank you very much! Link to comment Share on other sites More sharing options...
Jeffrey Stephenson Posted March 14, 2017 Share Posted March 14, 2017 Looks like it was a fun project to work on. Great job Evgen. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.