SAMAMBA Posted February 16, 2017 Share Posted February 16, 2017 Hi Cooler Master! It was the start of my new project that has the proposal to use Cthulhu, famous character of the horror stories of the writer H.P. Lovecraft in a theme Cyberpunk. Redesigning the character of terror in a more technological way. I want to thank some brands, who have believed in my work and are being partners to this project, and they are: Cooler Master, Avexir, Gigabyte and Seagate! The project base will be the Case MasterCase 3 Pro . Good folks! For now that's it, because I just received the first pieces, but as soon as I have news I put here. I also want to do a little review of the pieces! I hope you follow my project. And who wants to know a little more of my work as casemodder: http://www.samamba.com.br/ Link to comment Share on other sites More sharing options...
SAMAMBA Posted February 16, 2017 Author Share Posted February 16, 2017 PVC pipe to make the eyes. Custom laser cut acrylics. Drilling sides where a 4-way mike connector will come in for illumination. Side piece that will be docked at the connector site and lighting tests: Eye light tests that will be on the front of the case: Front part ready for painting. Project overview with black base paint. Avexir 32GB (4x8GB) Blitz Series DDR3 And that pleasant moment whenever something new arrives !!! SSD 120GB S100 Series with green leds Of course! Sponsored by myself! An I5 6400! (Intel, the next one can help!) And some photos of the motherboard Gigabyte GA-H170M-D3H DDR3 already equipped with the memories, processor and with the Cooler Master MasterLiquid Pro 240 already customized! And of course! A sample of how it's getting ahead of the case! Link to comment Share on other sites More sharing options...
SAMAMBA Posted April 14, 2017 Author Share Posted April 14, 2017 Some photos of him exposed at Campus Party Brazil Link to comment Share on other sites More sharing options...
SAMAMBA Posted April 24, 2017 Author Share Posted April 24, 2017 More photos, but this time taken by the photographer and casemodder MGyovanni Link to comment Share on other sites More sharing options...
SAMAMBA Posted May 3, 2017 Author Share Posted May 3, 2017 Some images I found in the photo gallery on my cell phone... Sleeve The most time consuming thing to do in a casemod, especially when you do not have an extractor... Top that controls the arduino responsible for lighting and color control via bluetooth + Arduino with 2 sections and fade effect... Finishing effects of painting imitating metal, even without the front panel... Photos of him on my desk... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.