mayhem modz Posted September 17, 2019 Share Posted September 17, 2019 HERE My project EVIL MASTER this project is made for an amazing light effects this is the case starting with the sire panel with INNO3D logo graphics on the frames Link to comment Share on other sites More sharing options...
mayhem modz Posted September 17, 2019 Author Share Posted September 17, 2019 psu cover building with a little windows with psu and graphic card logos this is an support to keep cover psu very firm on te chassis in this way the psu cover will be firmly supported as the majority of them. over time I realized that it needed to be changed into a led panel below now is better! Link to comment Share on other sites More sharing options...
mayhem modz Posted September 17, 2019 Author Share Posted September 17, 2019 sponsors arrived!! Link to comment Share on other sites More sharing options...
mayhem modz Posted September 17, 2019 Author Share Posted September 17, 2019 questp è im pannello a led che inserirò all'interno del case, oltre a d avere leds luminosi avrà un supporto per l SSD e il logo del pc. Link to comment Share on other sites More sharing options...
mayhem modz Posted September 18, 2019 Author Share Posted September 18, 2019 these are the LED covers for the SSD technical tests for positioning I wanted to place LEDs under the PSU cover but because of the space it is not possible then I have persuaded myself to make a back plate I hope it is good ... I used two lilac diapers, one of 4 mm for the underlying paste and one of 2 mm for the upper part I also decided to change the front panel, coolermaster is fantastic, it already has its LEDs assembled together with the case, I change the handle to create a new one completion of the bulkhead logo these are the supports to fix the internal led panel that also supports the ssd there is plenty of space for cables Link to comment Share on other sites More sharing options...
mayhem modz Posted September 18, 2019 Author Share Posted September 18, 2019 I decided to add a back plate for the GPU but without covering it completely, this fantastic inno3d card already has LEDs and I don't want to hide them the surface is very wide, I can put the leds only in the upper part to use all the light I can use the white vinyl below to maximize light refraction Link to comment Share on other sites More sharing options...
mayhem modz Posted September 18, 2019 Author Share Posted September 18, 2019 comes the most boring part .... place all the leds strips, the cables must not be seen below, so I will make them pass under hard work but the final effect will be beautiful. Link to comment Share on other sites More sharing options...
mayhem modz Posted September 18, 2019 Author Share Posted September 18, 2019 this case there is no liquid system AIO I have to modify the case, the grids would greatly limit the flow of air, I prefer to open it. Link to comment Share on other sites More sharing options...
Sa mod Posted September 18, 2019 Share Posted September 18, 2019 Bel lavoro Link to comment Share on other sites More sharing options...
mayhem modz Posted September 20, 2019 Author Share Posted September 20, 2019 grazie ste.. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.