Jump to content

CYBERPUNK 2077 YAIBA KUSANAGI scratch build


Recommended Posts

side panels where the air inlets will be present later everything will be clearer.kPo9vMi.thumb.jpg.55d88e7eb1b381d9bc6d3613ae66332d.jpg

 

k91Cn7t.thumb.jpg.18ad5160a4b02da78a324c8c453d800d.jpg

 

dty3MSi.thumb.jpg.afb26605209f3eaf8c2bc065a50d19d2.jpg

 

I realize that the acrylic has deformed in cooling down I have to fix it with putty to keep all the lines flat I apply some fiberglass putty to fill the curved areas and then some body filler which is much smoother and workable.

 

M0fbkZG.thumb.jpg.abf367980bb4443e23ef0c30aa08a2be.jpg

 

Acc9x9G.thumb.jpg.b9940e0a9399b4d872e5310b48388c16.jpg

 

s1SPwxO.thumb.jpg.6dd01dc8ec4ffdfc6d45571451d2a97f.jpg

 

give a coat of primer to make sure that the surface is completely smooth and without holes.

 

I2KKJh6.thumb.jpg.164769b60633ec460ffa4218df66ddcc.jpgI2KKJh6.thumb.jpg.164769b60633ec460ffa4218df66ddcc.jpg

 

much better but I already see that areas need retouching ..

 

Y0GvvpD.thumb.jpg.a062dca3570a2bc26fac0d416f7d754f.jpg

 

I proceed with a coat of primer on the bracket frame (coolermaster) for the gpu and suspension arms after coat of anthracite gray

 

XfcOPDX.thumb.jpg.70882e1ae8115c35a501d249f422137c.jpg

 

oMy2Kvt.thumb.jpg.57856a683bf79cef9b9bc8f83dfbcdd4.jpg

 

aiAld5o.thumb.jpg.f4763e4f2e3beb0fccdae42f22e9d49d.jpg

 

Fd6RAOc.thumb.jpg.cc8bf1a3e609f5199875bd54b449dd50.jpg

 

0NflXVB.thumb.jpg.6b56be428990ca68dbaa90dda2871391.jpg

 

MnVCFjl.thumb.jpg.e942b424790610dfa713ca626f3ae0ac.jpg

 

csy8fWg.thumb.jpg.7fc5795789c4c237c093adb574d1b95b.jpg

 

bJSz2yi.thumb.jpg.e3dbe0f0d0601c82b3fcbb0f140e500b.jpg

 

S5RV5a3.thumb.jpg.89e244009ad0e9ddac80557bb7447d75.jpg

 

 

  • Like 2
Link to post
Share on other sites
  • Replies 64
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

+                                  

realization of the last upper front and back cover panels I do all the tests on paper when everything is in measure for the folds I prepare the acrylic sheet that will be folded, puttyed and fixed

working on the bottom of yaiba the umpers               two pieces on the top          

Posted Images

now it's time to install the 5 "LCD screen it will be positioned on the front and will contain the looped CYBERPUNK logo first I create the supports I do not want to see screws outside the case and I prepare the 2 guides on which the monitor will be mounted

 

b6nedwk.thumb.jpg.2fbad19f3b9a4ce67f2380cf3bfbd624.jpg

 

I calculate the measures and thicknesses well

I found these beautiful threaded nuts, in Italy they count an eye but on aliexpress they pull them back ..
they have finally arrived and therefore I put everything together I drill a 4mm hole and place the data on top

 

yz3f9ya.thumb.jpg.4ac9cdb4e1bb3751bf7703d25b758579.jpg

 

with the soldering iron all I do is place it on top

 

oPSqVMf.thumb.jpg.a056ebe4146d39d58393bcaf42cf7a84.jpg

 

with the soldering iron all I do is place it on top and as if by magic the acrylic around melts all around and sinks into butter and then cools down immediately

 

9cxADGZ.thumb.jpg.d807ca67d05dbdca783b2d268cf40a87.jpg

 

great a clean and fast job

 

yZeNw2N.thumb.jpg.ec65dfa96997eb45c848be7d6766ef14.jpg

 

CzjdM9e.thumb.jpg.328f7ed3b702cdf069d784f65c418eef.jpg

 

Oi1qD6q.thumb.jpg.a40060e58bf53311b5aae5df793e16f8.jpg

 

my faithful glue ..

 

Wlv3Z3m.thumb.jpg.f3db02ca369a0879fe5476ea65838d08.jpg

 

I4MKqFh.thumb.jpg.88d2d9dc71ef9357a06d14ec7c40c14d.jpg

 

 

ubBvKhj.thumb.jpg.4f3d8e35a5d8ef9ba6676b1f2d20d866.jpg

 

to best position the whole use as data shims and washers.

 

 

0UZrkSV.thumb.jpg.bbd270bf464e75f2f1abf46d0fb0d057.jpg

 

there he is..

 

 

  • Like 2
Link to post
Share on other sites

today's work, creation of the housing of the 2 SSDs positioned on the outside of the case well visible on the back the discs will also be modded and painted first step I disassemble them and prepare their surface with primer-

 

IMG_6797.thumb.JPG.408dcb10c88b6dbd0fb2f2affda8b10b.JPG

 

IMG_6801.thumb.JPG.e2e6196edcb50745297fee110cdab456.JPG

 

IMG_6798.thumb.JPG.6ecf0dab326c6067c9bf5ca728d0a434.JPG

 

IMG_6802.thumb.JPG.406e3b8c38a85f1d5ae691083b588d44.JPG

 

prepare the structure .. if I have not done wrong my calculations should be like this, the graphics may change and it is temporary.

 

1862052913_Schermata2020-11-17alle16_44_14.thumb.png.0400e1a5b47e15f13f1a3fc9df6173c7.png

 

IMG_6837.thumb.JPG.55fb950ed8701ebcd3fdc9c06c677f65.JPG

 

IMG_6838.thumb.JPG.79972fe06e6fdb6b721ae04964e603e1.JPG

 

IMG_6836.thumb.JPG.527723db64590459540f682a26c7406d.JPG

 

IMG_6839.thumb.JPG.d643fe266c560b37cc348069b639b04b.JPG

 

I create the threaded supports for mounting the case panel ..

 

IMG_6835.thumb.JPG.a2c1a1eb75b75220b7c197a9163cad13.JPG

 

IMG_6834.thumb.JPG.298cb526ad43ca92a4ec6ad871884627.JPG

 

IMG_6833.thumb.JPG.5243976e449c7c799053f311a2553fd8.JPG

 

IMG_6831.thumb.JPG.895a87cb0bb95b75ebe2e58ea5108e61.JPG

 

I still have to decide well the color for the paint or metallic red or anthracite ..

 

  • Like 2
Link to post
Share on other sites

I create a panel that will be led with samurai logo ... will have two functions the first to fill the inside of the case and the other to hide some cables as well as give a nice extra touch to the whole mod. I start with the construction of the panel that will follow the shape of the motherboard tray

 

IMG_6842.thumb.JPG.4453185516993b002cb677a8b93430cd.JPG

 

IMG_6844.thumb.JPG.a46d7e617d50f28afaf15e78a886c84d.JPG

 

IMG_6845.thumb.JPG.798b6dba8d9c8d6efba1d42420682108.JPG

 

and now the support, an angled aluminum strip and I use it as a support will be fixed to the central plate of the case

 

IMG_6846.thumb.JPG.b737d303a066ce98c0aa134d936ad470.JPG

 

IMG_6857.thumb.JPG.80c3d15a1d8034b3c7a86b8244de3016.JPG

 

IMG_6856.thumb.JPG.1d5d0c81a860751a33dfc1b6de449aea.JPG

 

aluminum bends very easily but cannot do it too much otherwise it breaks, the position of the corners must be studied well and moved as little as possible ...

 

IMG_6855.thumb.JPG.483b87cbb5dac568ac770f269baaef04.JPG

 

 

IMG_6858.thumb.JPG.eb9a13cf344f0f1de18c072f6ea1d042.JPG

 

IMG_6854.thumb.JPG.c778fe1be006493ec7e83ecac5f34c05.JPG

 

IMG_6850.thumb.JPG.bb928a9cb41e27fee53e8a23b2ed2ca8.JPG

 

the LEDs will be positioned on the side in the recess of the strip

 

IMG_6847.thumb.JPG.5b9d7cd0c6a722e99210363eb3597def.JPG

 

IMG_6848.thumb.JPG.e13ca65b4acdabcc05f5f7aae4db7887.JPG

 

in the meantime, touch up on the base structure of the case and then go to paint

 

IMG_6860.thumb.JPG.a91eff0af68905d25918150a8a702e3f.JPG

 

IMG_6865.thumb.JPG.a146439d32539266d8c8b6ad4796ff89.JPG

  • Like 2
Link to post
Share on other sites

painting application of silver (I will save you the dilution because done other times) these are all the panels that will make up the internal structure and that will decisively strengthen the whole case support panels, led door, and main panel on which the motherboard will be mounted.

 

IMG_6870.thumb.JPG.d37814847bcfd4aa3d508681a8606d39.JPG

 

IMG_6873.thumb.JPG.25a972bf97016ff24388a8952a90b1c0.JPG

 

IMG_6874.thumb.JPG.effa0d75cdeb1617db539b5b4f508f9e.JPG

 

IMG_6882.thumb.JPG.c3d4c2c05bf7b9c57eddac738f95ceba.JPG

 

 

SSD bay finished

 

IMG_6880.thumb.JPG.0de0a05d16f86295e9063ede80a45d2e.JPG

 

IMG_6879.thumb.JPG.936831d14996819cda7988e175c4b8b6.JPG

 

now after months the yaiba begins to unfold and show itself in all its glory for those who have followed me in these months will feel great satisfaction in seeing the assembly some lateral supports. essentially these panels are connected to each other with threaded steel cores and thicknesses keep them in place it was very complicated to distribute all the space as everyone knows I don't use machinery and everything was hand made old school.

 

IMG_6897.thumb.JPG.4af3f22d15c80f3fd302d511076d5ddc.JPG

 

IMG_6893.thumb.JPG.17784818e5bc6b64250312d792353e05.JPG

 

 

IMG_6907.thumb.JPG.d0381a10e0eb6a0c69874d9543eea0e0.JPG

 

IMG_6889.thumb.JPG.10254e10fe30194bc6395dfd0ac53eea.JPG

 

IMG_6895.thumb.JPG.5dce370c768eaf272bd6f7778fd74c03.JPG

 

IMG_6902.thumb.JPG.59fe7c000a65029a69fdef414a1b5e5c.JPG

 

IMG_6905.thumb.JPG.270a24b751389c7272c12c615eb86427.JPG

 

now it's time to insert the structure inside the frame and fix everything permanently ..

 

IMG_6911.thumb.JPG.cce654d2246bb25a56e842da57cdefce.JPG

 

IMG_6912.thumb.JPG.096ea1d3ac8d6825f807fa6cc575031c.JPG

 

here is a lot of anthracite gray but it will be 40% when all the external parts in metallic red are inserted

 

IMG_6923.thumb.JPG.eead8d53a1187aa070657cf103955f4f.JPG

 

IMG_6924.thumb.JPG.66fff8be8321dfe7290b9f185e46cd4b.JPG

 

 

IMG_6915.thumb.JPG.bf64d98d4796593b16148980886e9c9e.JPG

 

  • Like 1
  • Upvote 1
Link to post
Share on other sites
  • 2 weeks later...

I assemble some parts of the fairing to realize

 

IMG_6962.thumb.JPG.cc85c7107178e426bcdc2e2b4c39ad4c.JPG

 

IMG_6964.thumb.JPG.0c187125c629306fa7d6440428888132.JPG

 

 

IMG_6965.thumb.JPG.f33c9536cfcd58340e75eddd09f0bd84.JPG

 

IMG_6967.thumb.JPG.1a8068be5c1f552bb12bf82f8cc0bfd7.JPG

 

IMG_6966.thumb.JPG.95862fab6521804c8aea19eae1c73254.JPG

 

I do not exclude adding other parts in acrylic to accentuate the line of the yaiba

 

IMG_6968.thumb.JPG.916bc08ac7c7ef75c427dbd541e0d824.JPG

 

I proceed with the construction of the upper aerators

 

IMG_6970.thumb.JPG.7cad95db71199975624c70c006b7f8e5.JPG

 

 

 

IMG_6972.thumb.JPG.6d741486b08272e7e5482b1aaee77a6c.JPG

 

IMG_6975.thumb.JPG.7d482026eae873cb824589cb1de0c48a.JPG

 

IMG_6973.thumb.JPG.4bfa7f098b993bfa5d87ddb12d98f6cd.JPG

 

is time to paint some parts, the weather is not favorable, it rains ... but I have to go on

 

IMG_6977.thumb.JPG.2fe06f06287ff65646a8c2631def211e.JPG

 

provisional assembly of fan grill

 

IMG_6980.thumb.JPG.8fdaa67d6d1607697c6585729dac4d91.JPG

 

I have to calculate the dimensions for the cables inside even if it seems absurd there is little space.

 

silver finish on some parts

 

IMG_6984.thumb.JPG.b0379e1a624eb145a92f0e19dfc04475.JPG

 

IMG_6983.thumb.JPG.7f96610d3bbfec2dd26e834844996600.JPG

 

 

 

 

IMG_6981.JPG

  • Like 2
Link to post
Share on other sites

step back but necessary, I realized that I don't like the side panels anymore they are too protruding and from double pega it widens the internal space a lot and since the temple tightens .....
I decide to do them again ... youppyeee !!!

IMG_6999.thumb.JPG.bed048266bf83c58d7aded40f3863c0d.JPG

 

IMG_7001.thumb.JPG.b807166bc10da37a139544b458700a7b.JPG

 

 

IMG_7002.thumb.JPG.83fdd0c98bf84c2151ec461e7167e706.JPG

 

proceed with the realization of the internal slats to emulate the air vents.

 

IMG_6991.thumb.JPG.3268920b1f2b5451a2e7931cc487d827.JPG

 

IMG_6993.thumb.JPG.7c8e2c7459c01fba64486a16c96817a4.JPG

 

I calculate the thicknesses of the acrylic elements well, i.e. 2 mm for the slats and 4 mm for the thicknesses, everything must fit together perfectly otherwise it's a mess.

 

IMG_6995.thumb.JPG.e7ed92486bfe81322f556adfb2931378.JPG

 

IMG_6996.thumb.JPG.b2f20583c441d8a8ceeec31ebfc26dc5.JPG

 

I glue everything ..

 

IMG_6998.thumb.JPG.f55c5376775683a9447de04b1413f608.JPG

 

it is always annoying to redo pieces and you lose a lot of time especially if you have to do them by hand like me but the result pays off in the end .. it had to be done!

IMG_6995.thumb.JPG.e60c3682b568263d57d7ec82db66358c.JPG

 

IMG_6994.thumb.JPG.1541ed3b0bec57990a087b127ea734db.JPG

 

once completed, the slightly recessed panels (5MM) will be cut in perfect shape to give a depth effect.

 

IMG_7008.thumb.JPG.673436570da84b435bb5b9103ac6994c.JPG

 

IMG_7007.thumb.JPG.c85147cdeabb021dc76827644f2f0562.JPG

 

that's fine!

 

IMG_7006.thumb.JPG.974c27d2d0500359d1a833d83ca65f07.JPG

 

as we have already understood this project even if it started with a very specific idea is a work in progress, some unforeseen parts are realized along the way as in this passage.

I realize that although the fairing is beautiful it is flat, I prepare other external panels that attach to the existing panels to give a depth effect that was missing, these panels will join those already made for the external ones with air vents made previously.

I use the usual procedure, all by hand, cardboard template, study of the measurements, cut with a manual hacksaw and refinish 80 gr sandpaper for smoothing and 220 gr for finishing. obviously all the panels are unique the measures are taken side by side, because this mod is made entirely by hand and the individual pieces are not mirrored.

 

IMG_7010.thumb.JPG.9c8154667dd92b5eede95f04ec487393.JPG

 

use of two-component fiberglass putty to close the cracks generated by the bending.

 

IMG_7011.thumb.JPG.01a134d849432e93e0ccd24f389dc9fe.JPG

 

t's time to place them to take measurements for the fixing holes. at first glance I see that they will still need to be finished.

 

IMG_7021.thumb.JPG.f82b46ecf528886ccd450546e21d3d23.JPG

 

IMG_7023.thumb.JPG.5e2f8dc306387b4bfff80d9d3978fa4f.JPG

 

perfection is not of this world but let's try to get as close as possible .. https://forums.bit-tech.net/styles/default/xenforo/clear.png

 

IMG_7024.thumb.JPG.e7975f10796059dd882a29ba232563e6.JPG

 

IMG_7019.thumb.JPG.43ccb7858c1db9e42060f471163c9384.JPG

  • Like 2
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..