Jump to content

Termuda Square - BLΔCK MΔGIC


TermudaSquare

Recommended Posts

The final pyramid! 
 

After printing a total of 6 pyramids and tons of failed prints this was set to be my last final print and it turned out awesome. 83FFF128-CCAC-40E3-BF5B-8AC2073BD4CD.thumb.jpeg.e514bf68d4c94244e56e5b46b00aaf57.jpeg
7DD9222F-8F55-4CA6-A192-4572C9E16D3D.thumb.png.c0714e20ed0e579a3eb5f4070e8a3826.png

551B7B13-D680-4165-9931-D88A6C44BBA3.thumb.jpeg.4766aabb17c830a5f074969a2befa99d.jpeg
few imperfections I wanted to fix so I used filler and primer and then painted, but between steps I made sure to wet sand down the letters to make it easier each step to make those letters clear. 
5A757812-679C-4882-9F74-8531ABD1217D.thumb.jpeg.2a803edd2a0470c582b0f676cbbb3af8.jpegC29964F1-C833-44E1-939A-04F20DF1FC60.thumb.jpeg.e021ae2262d37ed65b4611ee6afe3e95.jpeg
had to fill drain hole so mixed up some body filler

3E1DB261-6FA3-44D9-B944-1E95D8718DAD.thumb.jpeg.54d9678e510d8822a8af049f70be7f0e.jpegD37E2735-505B-4FB9-8706-428A5419CDAF.thumb.jpeg.59782ba7d81a556bc3d40e8e78f018a1.jpeg81E703CC-5E0E-4025-BF9A-EC55947F9615.thumb.jpeg.d3f4b39079dc0a2bcb5f7bdefd24697d.jpeg
F456C653-C349-4219-A922-DC4D09DB85A7.thumb.jpeg.05c78120ded5297556f16cfcfc1e2161.jpeg
also did this with the bottom lip, and then sanded and then primed. 
EC828083-22C6-4181-8F2A-93321F6E8D35.thumb.jpeg.11b8f9dd446cdbcf7ce0baf1b03b5eca.jpegC4ACCF74-9AE5-4664-99D9-1F78FE4320CD.thumb.jpeg.73920456f7b4b4a58225646fd7c2eff0.jpeg263EF1C0-8ACB-44E7-AB42-BC8C9EEB5B77.thumb.jpeg.bc19411a5c11f36b564517ea7fccb6fa.jpegC735DC6E-3EBD-4655-A49B-12CD1D2593D1.thumb.jpeg.3854a628949a470e474d529679963e50.jpeg

 

Link to comment
Share on other sites

  • Replies 97
  • Created
  • Last Reply

Midplate ! 
I wanted to make a mid plate with an inlayed graphics card and also a area for my magnetic levitation device. 
10EF6E2E-D3DE-4096-AFCC-3BB8B5492AD0.thumb.jpeg.be208fd2e83ea340cf79719e9cb56ed8.jpeg
Started in fusion 360 

13B154AB-3241-46D9-8F0C-CCC2840B550B.thumb.jpeg.af62164f15efa58b21e09241c46e147b.jpeg
Also designed a acrylic top cover to go over this that would hide the mounting holes for the midplate and also save me time on finishing since I didn’t have time for paint. 

212B2BC6-870F-4907-B276-7825993068B8.thumb.jpeg.1cd4f380779d046bfad7ec844728c765.jpegE6D2FF4F-8E77-450C-B564-1CA6E678EBBF.thumb.jpeg.609d7bbaf133428ee1655dd297d688a6.jpeg
3D printed brackets and magnetic mounting parts. 

353C3849-1F43-4E8A-B00A-CA68DD8009DC.thumb.jpeg.0d9416aac1f3eb6a732ef26a089c44dd.jpeg
Midplate Assembly time ! 

5FD46423-2B30-4F96-90ED-A801D345D05A.thumb.jpeg.d9c1838cd3d1de48ba6c7ea02045d693.jpeg
New Magnetic device “ digital magnetic device” upgraded from the first bulky test unit. And also fitted this one with a micro usb to usb to usb to molex connector. 

756F9E10-3C40-4C69-9B88-20C128F4EB4C.jpeg
for a print , those bolts fit nicely. 

3A781E27-C948-4731-BC97-3F9559499F50.jpeg

Link to comment
Share on other sites

Ceramic coated top cover & Install & Levitation test ! 

7DC6785C-45B8-491A-B632-B359B7E70738.thumb.jpeg.f77b6831136e8b3deef44e9a11c8fa92.jpeg
Started with my first layer of ceramic coating, I did a total of 5 layers. I wanted to make sure in the event the magnet ever comes off balance and comes down it would be less resistant to scratches. 

EF5B5542-32F1-494E-AB08-FE540DD8F504.thumb.jpeg.b1a31136f917b298641f93f53781f40e.jpeg
let dry 3 minutes 

AADE4EFB-F549-4E8C-BE5E-9CBB886D0F82.thumb.jpeg.51a97f86f50904e51a4632abdfdb447e.jpeghand polish off until dry464A6943-BFB8-4CBF-909B-D5AAFC5E7893.thumb.jpeg.7403af1c1b2b579b20255a22a68fc3c7.jpeg

looks good after install ! 

2CC9B7E4-4800-4D84-A192-CBF7920C81CC.thumb.jpeg.4233ee51f98c303c66ef6c356b889a58.jpeg

The test was a success! 

Link to comment
Share on other sites

Cable Pintout and measurements! 
 

had to make pinouts so my support @gscustomz on Instagram could make some full cables for this mod. 
 

v850 pinout, I know they have printouts online but it never hurts to double check. 
515CF9DD-E423-4D22-81C2-49D70585E0C6.thumb.jpeg.6f7b1f8b5c7a8932657f077d658c9546.jpegBAC90419-59DD-47D6-9067-7607695CDED3.thumb.jpeg.6605ab2a4e36516818a7b27d0fa76a76.jpeg91B1DF78-9F17-4CA3-B08B-DFDB3621A73B.thumb.jpeg.fc020dfacd501461cb6030c331815410.jpeg 
 

Shout out to @gscustomz the cables turned out amazing ! 397A1EB2-EE6B-4609-B5CA-9AA821244681.thumb.jpeg.938d0c45d690724c81c16203dec39c3d.jpeg

Link to comment
Share on other sites

More sleeving ! 
Sleeving every cable for better cable management! Including ( pumps, RGB devices, waterblocks, fans, , LED strip) 

 

Also added black connections to any connectors that were white. 
E069A0E1-9642-455D-AA37-76145AF5D140.thumb.jpeg.fa31941148971079a90609fa5d88e800.jpeg
 

Sleeved Alphacool RGB fan controller F9310EFB-DC0F-4F31-9C58-CB05C5CD0878.thumb.jpeg.1ca7dd905075e34ed147721ec9be2033.jpeg


And in the end sleeving every cable was well worth it for the looks and the ease of managing. BCB0FAC6-8DD7-476C-8171-A4DC57EFE4B1.thumb.jpeg.d74b60b96c57ef38701fc4dedc9c07c4.jpeg
 

Link to comment
Share on other sites

 cutting it close ! 
It’s 11:51 PM the night of deadline and I’ve been up for 4 days straight to be able to make this deadline, so sorry if my log is slacking on details. But assembly has still started to progress, as I assembled I modded and painted pretty much every item touched or that went into this mod.3A4D804F-D078-436C-B820-2C9FECA981C9.thumb.jpeg.d8d3dab655bfae2deadfcc334c0ca16a.jpeg1F006D09-EB90-4C36-9E22-60616017DDC6.thumb.jpeg.cdd4729a31fcf6f8fd87a4f63e4f7319.jpegE0252B76-5D97-42B4-958A-20258ED763EC.thumb.jpeg.95882c0ed114dbab32e23528dbc00eaa.jpeg

 

121A23A7-1111-4A69-AD66-26BDCFF95ADB.jpeg

6E4277DA-9E92-4A92-A1AD-45563D376DCB.jpeg

Link to comment
Share on other sites

Loop and fill time ! 
This is my second loop I ever had to do, luckily it was a few easy ones. But still this was in the last few days before deadline so I felt I was rushed and could have done a more clean of a job. 

B0C3476F-3F63-42B0-9524-51B0BEB8D291.jpeg

0458CA73-14D4-4BB1-A1E4-D6C74487D123.jpeg

89805718-709C-4817-95AC-CC6A5419D3B4.thumb.jpeg.c2b7b4d8878e79305f2028c8bb66366a.jpeg
Fill time ! 
I don’t have any fancy pressure test tools, so my test is let er rip potato chip lol , but after running for 48 hours no leaks so far. 
0B7699B8-D866-4E75-AC15-48025474C533.thumb.jpeg.5ddacee1c6ec7a7cbba2ff593566e943.jpeg

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..