Jump to content

Space Bar Mods -  Lilith, Mother of All PCs


JBiasi

Recommended Posts

Hi~ My name is Jamie. This is our first ever computer case mod and also our first year competing. Under the name of Space Bar Mods my family and I  wanted to take our skills to the next level. What better way to do that than jump in head first. We are avid gamers and PC builders but have never attempted a mod before, so any/all advice is welcome :D

Our concept is directly from last years Blizzcon. It was our daughters first year attending and the new cinematic for Diablo IV really stuck with us. A poster we received at the event is our inspiration for the build and is included with our hardware picture.

We have no sponsors, but would love some in the future ;) We are a family of "die hards" when it comes to components. We decided to go out of our comfort zone to try as many new manufacturers as we can.

 

Hardware:

  • Case - Cooler Master NR 600
  • Power Supply : EVGA Supernova 1000 P2
  • Mother Board: MSI MPG X570 GAMING PLUS
  • Processor: AMD Ryzen 9 3900x
  • Memory: G.SKILL TridentZ RGB Series (4x8gb) 3600
  • Graphics: ASUS ROG STRIX GeForce RTX 2060
  • Storage: Western Digital WD BLACK SN750 NVMe
  • WaterCooling: Bitspower
  • CableMods/Screws: Cable Mods

 

Can't wait to see how it turns out !

Logos.jpg

Link to comment
Share on other sites

Hardware Unboxing

  • Case
    IMG_20200920_163950.thumb.jpg.e352e07ca62ffb3d0c79bad60065e673.jpg
    IMG_20200920_164113.thumb.jpg.7598f072b0d9ac014727541ee14ead68.jpg
  • Motherboard:
    IMG_20200920_164347.thumb.jpg.d7b3e21e899fe5adbfbdca8e0269cded.jpg

 

  • Socketed Ryzen 9 (got excited to test the hardware out and forgot to take a box photo)
    IMG_20200920_171502.thumb.jpg.8363b7418ebd24049c1eb3a5abd595c2.jpg
  • NVME
    IMG_20200920_164511.thumb.jpg.2a980fef41474cf9a0623db56d678af4.jpg
  • Memory
    IMG_20200920_172516.thumb.jpg.ffc57af1c5ad97eed1d0adac0837e1af.jpg
  • Graphics Card:
    IMG_20200920_173226.thumb.jpg.0d6c1b58439f269844300ea593006158.jpg
  • Power Supply
    IMG_20200920_174341.thumb.jpg.665853569442974f65169751a36ff7a3.jpg

 

 

Lilith Lives:
IMG_20200920_194456.thumb.jpg.e82d9be97093da9979d876b0c2763f2c.jpg

Hardware test complete! I am on the hunt for a 3080 (like most of us) so I can really give her the power she deserves. I now have an idea of what our final water cooling loop will be as well as measurements to complete our mod. Time to start drawing.

 

 

 

 

 

Link to comment
Share on other sites

  • 4 weeks later...

Etching the glass - I've never working with this etching cream before and I didn't want to ruin the case. I ordered a piece of tempered glass in the correct dimension and thickness to mimic the case glass and did a practice run before doing the actual glass panel.

Practice Etching:
Vinyl is placed
PXL_20201002_185706249.thumb.jpg.12f68fdadfe8beb1534f33b77f9ca5d0.jpg

Etching cream applied for 20 minutes

PXL_20201002_190601401.thumb.jpg.2df3582c8e07643ee1f23c76114e68ed.jpg

Removing the vinyl

PXL_20201002_194512920.thumb.jpg.df79a97a09d7d3dcf1bdebe9d4e20dde.jpg

Final Practice Glass

PXL_20201002_195701759.thumb.jpg.0f68f8a1dabe5c8b1d8169035143101e.jpg

 

Etching the tempered glass panel:
Vinyl is placed

PXL_20201003_154557516.thumb.jpg.7028a9b23321121034d60047ad50f727.jpg

Etching Cream Applied:

PXL_20201003_155607434.thumb.jpg.e12a979ce59fb9fa06a158404c098822.jpg

Final Glass Panel! I really liked how this turned out and how the light reflect off.

PXL_20201003_163830243.thumb.jpg.7d87460ffa182d1c2c99dd37bf4de58c.jpg

Link to comment
Share on other sites

I completed 3d printing my heart. Glued it together with resin and UV Lighting and sanded it down to hid the connections. I then practice fitted my tubing and "Artery" Sizes to make sure they all worked. I then painted the hear to look realistic and left the inside white to allow light to reflect inside the heart.

PXL_20201003_170158353.thumb.jpg.ae22b7f372c4597949639379a9d4745f.jpg

 

PXL_20201012_195007966.thumb.jpg.195eee9512fce9548d15d81089185044.jpg

 

PXL_20201012_194951687.thumb.jpg.fb735fce276bf1148e6fca348c12b71a.jpg

Link to comment
Share on other sites

I attached my 3d printed horns to the case and tested them out with my wing prototype.

PXL_20201001_175621091.thumb.jpg.ef21f6896715a0db55a09d62c5e26818.jpg

 

PXL_20201001_183852226.thumb.jpg.6d0bc9dae9e3210c76327437514636fb.jpg

 

PXL_20201001_183955029.thumb.jpg.b4943985020502fb930a49913591d521.jpg

 

I came up with a new wing prototype and connect them to the wings. I like the way these are turning out much better. I also marked off and wired servo motors which when connected to the wings will allow them to remotely open and close.

PXL_20201015_164429383.thumb.jpg.ee48a8b8203d3757e24d043a16e108c7.jpg

 

PXL_20201015_164546012.thumb.jpg.1363652651e4544dbb52b17d65f64d52.jpg

 

PXL_20201015_164559075_MP.thumb.jpg.adebf5fdcb55eca94873851ee2c7aa73.jpg

 

PXL_20201012_212259567.thumb.jpg.e966875dd1fe8e5dd14e608aa67f54ab.jpg

 

PXL_20201012_212321251.thumb.jpg.29bd21277d3093135609988aa8d3e64f.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..