Omar Y. Majzoub Posted January 10, 2021 Share Posted January 10, 2021 Hello, my name is Omar Majzoub I'm Brazilian and I live in Sao Paulo I have been a casemodder for at least 12 years, I have been a partner of Cooler Master for at least 10 years. I have several projects but this is the first project I post here. the project is already completed, I will post the photos of the execution process, unfortunately I did not register all the stages of the project. but a good part of the execution you will see. My inspiration for the theme is the series and the game The Witcher I hope you like the project !!! I would like to thank Cooler Master and Team Group for supporting me on the Project Check out the things I received to carry out the project. A Cosmos C700m was used as a base! Cooler Master C700m Link to comment Share on other sites More sharing options...
Omar Y. Majzoub Posted January 10, 2021 Author Share Posted January 10, 2021 Idea and execution of modifications to the front of the case I thought about putting this wolf's head I made on the 3D printer but I didn't like the result I did the other way Link to comment Share on other sites More sharing options...
Omar Y. Majzoub Posted January 10, 2021 Author Share Posted January 10, 2021 Lateral Link to comment Share on other sites More sharing options...
Omar Y. Majzoub Posted January 10, 2021 Author Share Posted January 10, 2021 Modeling and Printing of the support for the hardware sensor panel screen Link to comment Share on other sites More sharing options...
Omar Y. Majzoub Posted January 10, 2021 Author Share Posted January 10, 2021 Execution of the internal side cover First I did the drawing on the CNC Router in low relief, but I didn't like the result and then I decided to do it in high relief on the 3D printer 3D much better !!! Painted and finished Link to comment Share on other sites More sharing options...
Omar Y. Majzoub Posted January 10, 2021 Author Share Posted January 10, 2021 Execution of the illuminated PSU cover Made all in acrylic 3mm using CNC Router. I didn't remember to take a picture of all the stages I had to change the project and the drawing because I had some difficulties to achieve satisfactory lighting. see the result Link to comment Share on other sites More sharing options...
Omar Y. Majzoub Posted January 10, 2021 Author Share Posted January 10, 2021 Painting! Sorry for the disorder in the photos. I will put all the photos of the painting process. Link to comment Share on other sites More sharing options...
Omar Y. Majzoub Posted January 10, 2021 Author Share Posted January 10, 2021 Assembly !! Again i apologize for not taking a picture of the process, unfortunately on the run i couldn't stop to take pictures Link to comment Share on other sites More sharing options...
Omar Y. Majzoub Posted January 10, 2021 Author Share Posted January 10, 2021 Finally the final result! I deeply hope you enjoyed the project, I want to improve even more next time. I promise to make a better worklog in real time. thank you very much Cooler Master and Team Groub !!! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.