Jump to content

Recommended Posts

When everything is fine, install the front panel next.

 

471262570_final5.jpg.ba1c10cc849defbdefa5cb49ea004907.jpg

 

 

After that, put the rest of the light boxes to install and test to make sure everything is fine.

 

2037148360_final6.jpg.ee6b8cbddfa9ecdcb6693e6a3115de02.jpg

 

652764010_final7.jpg.63a4b28938eae379ad4bc1151a13d294.jpg

Link to post
Share on other sites
  • Replies 30
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

The PSU is at the bottom center.        When assembling and maintenance requirements. I designed it to just pull the shell around the magnetic mount. It is clear and easy for

Installed to the body.                The last step. Plug and Play !!!     Finish        

Hello everyone 😁, I am glad to be able to participate in this year's contest again. I got a lot of trouble from COVID-19. My home is at the point of the worst outbreak in the country. I pray that ever

Posted Images

The next step is to complete the installation of the hydraulic model.

 

1551958496_final8.jpg.3e5973a9b3c2ae62303d10a34e5d0826.jpg

 

 

1076780113_final9.jpg.58162ccf09c0cf4e3a1f7a85e8c349a6.jpg

 

 

1889826644_final10.jpg.6cf360c6fab723645d3df96b10c022b1.jpg

 

 

1250493964_final11.jpg.9f6ee77d4f21488ca83f18ae542e3fc1.jpg

 

 

All the shock absorbers I designed are separate and can slide a little.

 

 

296317665_final12.jpg.eb89de17e2893a44d18788dd857abffe.jpg

 

1097844053_final13.jpg.15c77c5fb131fd53220339bd656ba041.jpg

Edited by Inony
  • Like 1
Link to post
Share on other sites

After that, the next step is to install the PSU in the designed location.

 

862767111_final14.jpg.242ba98cc588ea1c1a170af3f8dc4642.jpg

 

 

And take the final gear set to install in the designed position. This group is magnetic and has a socket support. it can be easily removed in - out When replacing PSU or cable management.

 

1768406151_final15.jpg.db186fcff5c15d67f131402e956c284e.jpg

 

1054968954_final16.jpg.e95f81ca2808a98b19ad9fd6152ccc25.jpg

 

 

 

 

Edited by Inony
  • Like 1
Link to post
Share on other sites

After that, the body shell was installed.

 

9414009_final17.jpg.2ab9a0081c8e1fb4720f1daaa85e7354.jpg

 

 

1126363077_final18.jpg.52e74e695e1ba5c2bf9564b680d5da43.jpg

 

 

This shell at the bottom Can slide down a little for open the Back I / O connector on the back of the motherboard. I'll show you in the video that I'll upload when it's finished.

 

1968685917_final19.jpg.b71688241e8b41d39cb50c8bd4bc039e.jpg

 

976204042_final20.jpg.d04b37a410b482843569b43333350d15.jpg

 

 

  • Like 1
Link to post
Share on other sites

The next step is to assemble the front door. Let's try to make sure everything goes smoothly. And it can be completely articulated. Bring the acrylic sheet to heat bending. And fixed.

 

 

1373378649_final21.jpg.4c832a7eb6a607beaa3ea90301240190.jpg

 

1220164625_final22.jpg.580c22f343cbe2e158f80b972c63e56c.jpg

 

 

There are four magnetic sockets at this point on the main structure. And now everything is fine.

 

789327147_final23.jpg.eab8a2552a3e7b3318b43541fdb747dd.jpg

 

 

  • Like 3
Link to post
Share on other sites

When the torso is completed, then the shoulder.

 

 425697525_final1.jpg.7b8d1fc3831e8516fdcd44bd236312da.jpg

 

At this point, I designed it to accommodate a 120 mm radiator. But the hardware that I installed, I only use AIO, so I installed just a fan for beauty. No need to add more radiator 

 

1850044418_final2.jpg.1a20cac7728f8c334a41c6f288f29aea.jpg

 

 

1825766136_final3.jpg.ea72aa1db4b64b96f1c3431c945a97db.jpg

 

 

After that, the part of the door was attached together. I used 4 magnets on each side to hold.

 

469595285_final4.jpg.97c7c16d552bdf24c583fb0b80fc9143.jpg

 

 

1482376040_final5.jpg.64ec064fccbe906b8e4872372c4e7255.jpg

 

 

36066137_final6.jpg.861f0c8fc3a023cf4958ca5dd71b9c6c.jpg

 

 

2099719153_final7.jpg.0b2bd09b9910a45d216741fdfff3332e.jpg

Link to post
Share on other sites

Bring both shoulders and attach them to the body part. To install the main hardware built-in

 

1815577541_final24.jpg.30174fedf9d2af9d2bffaec61ee92023.jpg

 

 

1834299615_final25.jpg.6cbf3358cfaa59a5ab930b2f203acbc5.jpg

 

 

775066375_final26.jpg.378f3921278c6b00292b29eebdd66e89.jpg

 

 

When the hardware is installed, I run the test once to make sure everything is fine.

 

 

366425634_final27.jpg.54d18356d60b3d35d7fbb3cf28cc62ec.jpg

 

 

974408653_final28.jpg.7549628b8f7a84e1a084363d05ee56f6.jpg

Link to post
Share on other sites

The next part is the body. Which has no hardware, but must be installed In order not to turn my work into a headless.

 

1348702285_final29.jpg.e46ff0422ad97b03ec941c705c63f088.jpg

 

 

95215491_final30.jpg.9901a9c5993411f81d17529094e70a4a.jpg

 

 

394936624_final31.jpg.e87939ef0e42e03fdea86da6fc50e81e.jpg

 

 

I used a magnet to install it to make it easier to service the LED.

 

1947042959_final32.jpg.dc890834ed13005ba96184ed082c0c66.jpg

 

 

378530589_final33.jpg.c7b49f6edeaa07e51b33388032047033.jpg

 

 

Test the light for once. To take a picture for the forum update and then mount it on the base.

 

1345450275_final34.jpg.2fd4bedb262f260395b1f37e5b345220.jpg

 

 

1853523238_final35.jpg.501f7e4c678120eac4bb0e0c5a6d0e3e.jpg

 

 

1627837493_final36.jpg.aff3d5287232acc4f799cc5dc9b17d2c.jpg

 

 

I made it separate. To make it easier to work

 

402880028_final37.jpg.72267e3bf8ff3795eef479dabc0f45d6.jpg

Link to post
Share on other sites

Next is the Backpack section. It is the part I redesigned to be able to install VGA. 

 

I started with the Light Saber set first. This part has to be very careful. If the screw is too strong A beam from Light Saber may come out and cut off your hand.

 

 

37275727_final38.jpg.395a67b4d81ad4d5236086f7757eca47.jpg

 

 

856097824_final39.jpg.98e57792d739ccdde7147cdd06b8ac43.jpg

 

 

Then came the installation of a jet engine.

 

784536294_final40.jpg.b780d42c1a15a085ddda8d7301176d87.jpg

 

 

1556618022_final41.jpg.4d4d629bd6b1677c27c375bf35f7bfa5.jpg

 

Everything is installed in the steel structure.

 

2044501157_final42.jpg.1afc34402175d5594001a7522f69c29e.jpg

 

 

1114070095_final43.jpg.cb6325c0dc8c7fd0dbfd6cdd8fe8d6b6.jpg

 

Testing the LED that it works fine.

 

545647648_final44.jpg.852f463e05506b76b698f3f3b1dfd75a.jpg

 

 

1060190186_final45.jpg.98b4ab4b655cb33f495aeb3524a154da.jpg

 

After that take VGA Come and install to check the height , the cover, the power connector, or the anchors that everything is fine.

 

1336382423_final47.jpg.759f2255869f0a97957bde1b06db0b3f.jpg

 

 

1612652462_final46.jpg.d93d7600c24a9dcc9dece9df101e005a.jpg

 

 

1979538977_final48.jpg.61a03df0f94ce0499450a58441fc33bc.jpg

 

 

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..