Nicholas Falzone Posted January 31, 2021 Share Posted January 31, 2021 My peripheral mod will be of the Cooler Master MK850 Keyboard along side the Control Pad. I mostly wanted to make these pieces fit in with the aesthetic of the case better as they are already beautiful stock. The plan was to cut some Wenge and put that in place of the stock foam pads. To do this, I used my bandsaw to cut the Wenge at an angle and chamfered the edges. I then sanded everything to 600 grit for the smoothest possible finish. Before finishing, I added some magnets to attach the Wenge to the Keyboard and Control Pad since I noticed the stock pads had these as well and they work well to prevent the pads from moving around. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.