ArgOs Posted April 16, 2011 Author Share Posted April 16, 2011 You said it, PaPang. Thank you this weekend I will upgrade. Link to comment Share on other sites More sharing options...
ArgOs Posted April 18, 2011 Author Share Posted April 18, 2011 I pop rivets to attach the fender, then I sand it. my new acquisition, a fan CooleMaster Megaflow. cut for the wheel. I prepare the sheet, sanding it. I put the putty. paint the front. Link to comment Share on other sites More sharing options...
ArgOs Posted April 23, 2011 Author Share Posted April 23, 2011 Continuing with my solitary work, Inside the fender, I placed a plate for better viewing and will pass putty for details.. Then I paint with primer. I pass sandpaper the to the other parts to pass after priming. The front and the air intake. I reinforced the top, I will pass the sandpaper and putty, then put the air intake and putty. I cut to the air intake. Then I reinforced the bottom and I made ​​some cuts. And finally I started to paint some parts. Thanks for your feedback. Link to comment Share on other sites More sharing options...
Tortured_soul Posted April 23, 2011 Share Posted April 23, 2011 wow, its beatyfull, excelent design. Link to comment Share on other sites More sharing options...
ArgOs Posted April 30, 2011 Author Share Posted April 30, 2011 Tortured_soul thank you master. After the primer was sanded the surface to match it. Place a plate on her side, and you will see in the future. Then everything was painted shiny black. the hinge and silver color foot. Pictures of the progress of the painting. I cut the side to match the inclination of the case. Thanks to all for the comments. Link to comment Share on other sites More sharing options...
FrenkieNL Posted May 1, 2011 Share Posted May 1, 2011 Nice design, looks really promising. Keep it up man ! Link to comment Share on other sites More sharing options...
ArgOs Posted May 3, 2011 Author Share Posted May 3, 2011 Thank you master. The side ready. I use a part that I cut the case, to create the side support. I will attach the hinge to the Side. As you will see there is much dust in my garage. I put a rubber at the foot, between the steel sheet and foot, other rubber will go under. I created the mesh brackets I painted pop rivets. Link to comment Share on other sites More sharing options...
ArgOs Posted May 10, 2011 Author Share Posted May 10, 2011 I hope to finish it takes very little time and I still have not finished the work. Computer hardware. The Support for HD I begin to put the hardware in their place. Other changes in progress. The filter of the air intake. Link to comment Share on other sites More sharing options...
PaPang Posted May 12, 2011 Share Posted May 12, 2011 OMG Argos, just like I said, it is soooo hard to see detail on a black mod, specially with a black interior too. I see the work on the slanted side cover, factory made look like you said. You do need a good wire management job to make us proud. The grill is +1A! I don't like to rush you but there is just a couple of more days left, so no sleep for you, hehe. Cheers and Saludos Link to comment Share on other sites More sharing options...
ArgOs Posted May 13, 2011 Author Share Posted May 13, 2011 Thank you very much PaPang, I'm fighting against time and I will order the wiring. I will finish it Sunday. I show you a detail of HD support. The wheel clock I completely disarmed. Electronic circuit. I cut the tires well and the fan I cut inside the tire and the fan Put in place. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.