Peter Brands Posted March 20, 2011 Author Share Posted March 20, 2011 Been playing with a lot of stuff this weekend Testing with the 2 (3) PSU's Total of 2600W running now. And off course my 3.3V 5V and 12V are superb now Very silent psu's by the way ! Even under full stress 980x @ 4.5 Ghz + 2 x GTX580 @ 960/1150 And creativity with Bitspower on a Sunday afternoon It was to see the effect of flowing Acid green right under UV leds in the desk. (For further plans ) Link to comment Share on other sites More sharing options...
Peter Brands Posted March 22, 2011 Author Share Posted March 22, 2011 Needed for the Coolermaster PSU's After the mouse i was looking for a fitting mousepad for the desk. Personally i like cloth pads like the Q-pad. Couldn't find anything at all. All i could find was a pad with leds in it. But then the idea popped up .. Still had some plexi somewhere, and there are 150 UV smd leds in my desk so why not try it The plex. (Fits perfectly !) The "hard" SLI connector. And my RVS cupholder With a jigsaw. Maybe im going to let the print melt down into the plexi with its pins The Q-Plex And the ...ehm ..cupholder Still goin to polish them some more later. Link to comment Share on other sites More sharing options...
Peter Brands Posted March 26, 2011 Author Share Posted March 26, 2011 I could sell my Intel X18-M for a good price, so wanted to try the Intel 510. Going to use it as OS drive Last pieces of work for the SLI connector Link to comment Share on other sites More sharing options...
Peter Brands Posted March 31, 2011 Author Share Posted March 31, 2011 Some info about the upcoming updates. - Application for powder-coating is in progress ! - And a small teaser Link to comment Share on other sites More sharing options...
Peter Brands Posted April 9, 2011 Author Share Posted April 9, 2011 Still had to change some things under my floor. Today i found some time. Had to replace some fans on my rad for Scythe GT's Replaced the green tube for Tygon black. Also replaced the 3 remaining GT's in my desk for green Nanoxia's GT's out Only 5cm space for my hand. Nanoxia's in. Here my radiator in the distance. On request also made a little movie of my trip Mobile doesn't work here, but baby phone works fine De GT's on their place and tubes replaced ! And another small test. Wanted to know what stuff goes trough my loop. This way it was easy to discover. Click it between my tubes and enable the pumps for one hour. Then disconnect the filter while pumping and stop the pumps as fast as you can. This is so the dirt really stays in the filter. All tiny hairs and wtf, even a piece of my sigarettes Till next time Link to comment Share on other sites More sharing options...
Peter Brands Posted April 13, 2011 Author Share Posted April 13, 2011 Received a nice UV led board today. It's specially for making photo's from UV-active parts. You can only use it for 5 minutes per time, else it gets too hot Small surprise between the UV leds And some pictures with the effect Link to comment Share on other sites More sharing options...
Peter Brands Posted April 19, 2011 Author Share Posted April 19, 2011 The date for powder-coating the desk has set ! Next week Tuesday ill bring it over there 10 minutes before unplugging it And 3 hours later Also took me half an hour to think how i will place the second PSU. Decided to place them like this, ill creata another 120mm fanhole between the psu's tomorrow Wanted to use these for my quick connectors outside the desk Maybe till tomorrow Link to comment Share on other sites More sharing options...
Peter Brands Posted April 19, 2011 Author Share Posted April 19, 2011 Yesterday the idea came up for hiding my cables from the 3 screens. Some won't like it, but for me this works great since my pc is more open then closed So this way it's very easy to take away the backplates. It's only connected with the left side of the panel. 2 hours later it was really empty, looks like a reverse buildlog Sanding it some. Like a bomb exploded. Here i was finished for today Link to comment Share on other sites More sharing options...
Robertwhamm Posted April 20, 2011 Share Posted April 20, 2011 WOW... If I had a dollar for every time you took this thing apart and re-assembled it, I would almost have enough money to buy half the components you have put in there ! You have amazing patience and your build is also amazing! Link to comment Share on other sites More sharing options...
richardbmx Posted April 20, 2011 Share Posted April 20, 2011 excellent work congratulations friend, I really admire a job Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.