petoscal Posted May 4, 2011 Share Posted May 4, 2011 Well a very late entry to the contest just to "make noise" here, since I dont have as much expeirence as anybody here, Just want to show the mod I've done in my free time, but for problems of moving place,and a few stolen pÃctures (and camera) I dont have much to shown here, so please dont be too hard on me please. The case I chose is one that I had screw when I began to make mods (about a year ago), painted already, bad cuts and a poor job with the bondo, so the best I can do is to try to rescue it and recover a bit of pride after this disaster: We began by removing the painting, a few sand papers, little painting remover, a brush, and ready! Well at least the best I could. My idea for the window is to use a 200 mm cooler master fan, so the two small ones have to go. Now, with a bit of momentum I decided to make the window with "smoke" acrylic and the logo of the fan I hope you like it, any comment is welcome, more to come soon... Link to comment Share on other sites More sharing options...
pcjunkie209 Posted May 4, 2011 Share Posted May 4, 2011 I am a skull fan! Link to comment Share on other sites More sharing options...
milo_smiler Posted May 4, 2011 Share Posted May 4, 2011 very good way to work saludos petoscal Link to comment Share on other sites More sharing options...
petoscal Posted May 4, 2011 Author Share Posted May 4, 2011 Glad that you like it, now the continue of the logo, I change the blue leds for red ones in the 200 mm fan and engrave the gear for the logo the paint Job looks like this still have to paint the letters, and a few more things but that's going to be next weekend, I also started to think about the front pannel and the power button, now with the fan mounted in the acrylic sheet for the front panel I want to have 2 sheets of 3mm acrylic and between them I'm going to put this image Ihope you like it see you later! Link to comment Share on other sites More sharing options...
petoscal Posted May 9, 2011 Author Share Posted May 9, 2011 Ok, so now for the finish, I cut 2 pieces of acrylic, and use the image that I've said for the front. Also, since I cut out the power and the reset buttons I mange to use those electronical buttons on the top pannel and put some led for the hard drive and the power, I made those like that because I want to see it raw, but the acrylic is tall enough for a little protection for them. the paint for the other side pannel wal the gears letters. in front I use a 120 mm cooler master fan and the grill weas made of a perforated sheet tha I have for old mods. I really hope that you like it See you all next time Link to comment Share on other sites More sharing options...
PaPang Posted May 13, 2011 Share Posted May 13, 2011 Yes, a very late entry Petos but good to see someone else from Mexico. Best of luck on a much improved project from the last time with a great theme which was tight and faithfully carried out through out the case. With patience and step by step you will be on your way! In a couple of years, I am sure we will be back with much improved projects. Cheers and Saludos Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.