ALMA MECANICA

[Tortured_soul]

First of all immensely grateful to the sponsors for believing in the Colombian talent.

sponsors:

to work, to disassemble:

Then sand grids and others:

[Tortured_soul]

I'm slowly but surely, I leave a new advance:

Well, here cutting aluminum foil of 1.5 mm:

plate for power supply:

the test is not yet cut, but will be soon:

[Tortured_soul]

developments today:

over the braket for the cpu:

Cutting and drilling aluminum support for the power supply:

and ready for hinges:

installing hinges, the angle first and then the case:

Without blood there is no mod:

Base power supply in place:

Cutting deck:

and bending, the plate is supported by the desk:

and then just doubled with the help of the press:

then post them to the case at the top to secure the door:

by the ridges to bolt directly onto the plate:

and testing with the power supply installed

Then replace the plates of the PCI's

Well, cut and file two pieces of aluminum:

and disarmament and paint a fan excalibur:

Allow to cure the paint tomorrow.

[Tortured_soul]

then has to cut a gear in mdf:

Removing motherboard tray, because I do it? I have not the remotest idea.

Well, a few days ago to buy some materials:

Rack auto speaker, thermo-shrinkable, LED strip, individual LEDs.

LED Strip lit, great advantage over the cathodes? 12v Direct operates without boxes, you prune cut and is very flexible and waterproof, small disadvantaged, welding and accommodate a molex.

can be cut every 3 LEDs, typically is signaled where to cut, if cut 2 or 4 will not work,

well then make the cut to install 2 strips of 3 LEDs in the fan:

Primer:

paint, box, blades and racks in the sun of summer:

Install:

Power supply:

We got it up in the case:

FIRE:

[Tortured_soul]

FIRE:

Then mark, cut and fold the top of the case:

now find a way to fix the main gears:

[Tortured_soul]

Well gentlemen of new developments, was a little busy so had not posted, 20 is deadline, so you will soon see the end of this mod.

I was born the idea of ​​a grill something different so here we go:

to cut a cube that will support a part of grill

after a few cuts

and after a few cuts and some sandpaper:

good move to acrylic for the grill, design set and ready to cut into the jig saw bench.

can appreciate the design hit the 2 grills:

ready:

now create the gear for the grill:

both sides of the grill cut:

[Tortured_soul]

and mounted:

Unfortunately I did the pin broke, so I changed to screw the grill working here:)

and here assembled

change the radiator support:

[Tortured_soul]

then step to the design, cutting and folding:

mounting:

and cut:

fpower suply with sleeving

ymore gears:

finally putty and sanding the top of the case:

more progress soon.

[Tortured_soul]

Disassembly for paint:

But before you paint, touch up and repair the part, first cut a gear to cover the air outlet:

after cutting, riveting: