[Scratch Build] The Pagoda SkyScrapper

[Kuma Inu]

Hello there i'm participating with a Scratch Build:
Mitsuzero
From Mexico
and ModdingMX MOD Forum
1.First materials and hardware that i want to use.
Materials:
 

• Wood Fiber.
• Acrylic Panels
• Bolts.
• Balsa Wood!
• some carbon Fiber but not to much!Hardware:

 

• 2 * CM Fans seem 12" (OLDs But working)
• Athlon x 2 (2 Ghz)
• Asrock N68-VS3 FX
• Kingston HyperX DDR3 4Gb * 1
• Seagate 160Gb 3.5" (An Unused DD of an broken notebook)
• Damaged Drive For Fun!.
• 2 x 20" Fans with a managed RPM.
• Wifi Card with Long Antenna.
• No CD Drive

 

2.Description Of MOD:
I love Asian culture, and the pagodas have been a symbol to recognize them by their age and what they mean, I know it will be a good mod,I've been working the pictures to put them, here, as well as the course of the mod, Thanks and hope you like it, greetings from Mexico. oh i forgot sry im a English Noob, im not good. and if i do some mistakes sorry for that...

[Kuma Inu]

[RESERVED FOR FULLY COMPLETED MOD]

[Kuma Inu]

Pictures of the boxes! XD

Mother BOARD asROCK

And The processor ...

Mobo

and Disk Drive (2.5") ,Fans (;O ) and Memory Kingston HyperX....

FPU

This is my hardware (huh....) is not that higher, but is functioning

[Kuma Inu]

I'm done this in Sketch-up -i'm learning how to do it .... (waiting like my work!)

another.

rear side

For 3D models, of the 3D build of the project i'm use this dir: http://scc.jezmckean.com/ .....

[Kuma Inu]

This space is reserved for balsa Wood Work - Work in progress! wait a moment please !

[Kuma Inu]

im updating by parts (in this case-the fan)!

Pic show the Mark... -For proof-

This fan have holographic decal, and normal in the back .

i want to paint with gold the inside(the blades) and the fan frame with silver, i'm painting with acrylic paint , finishing with transparent "varnish". 

and i want to sleeve the wires and put leds .... i need to desolder the wires. 

first removes the decals.

To do it, i need this tool.

 

 

 

 

Then i try with this tool and the "welder"

But it is so dificult, i only use the welder.

 

Clean the wires to sleeving it!...

i buy some "shoe-lace" in a street market, by about $30 pesos(around 2.5 Dlls) to Sleeve the wires.

Sleeving the wires(this is my first "try")

 

 

 

 

 

Soldering back the wires(remember this is my first try.

 

 

 

Clean the CM Fan!

 

Dismantled fan (sry for no picks for the process)

 

 

Showing the acrilyc paint...

Painting Process

 

 

 

 

 

 

Preview:

Dismantled Again for Put the LEDs

put holes in fan .

Sanding the LEDS(to flatten - to prevent hit the blades)

Soldering the LEDS.

 

Check the LEDs(all fine)

Glued ...

Painting the leds Wires.

 

Fan Modded

<<--back

With movement 

 

 

This is pre-mod->>>>

and this is the Modded FAN! i like the work!!!

Thanks for viewing this Project... and feedback is welcome!

[Kuma Inu]

First Show the FAN in Darkness

First put the "dragon" on the Acrilyc

Using The Moto-Tool To put in the Acrilyc

and remember this is my first try also...

I need to do some changes ... ok then " hands on work" ,,,

I Cut some pieces i dont need and to do a good form and sanding it... to gain Shine (first 320 then 400 and then 2000 of Grain of Sand Paper)

Check the cuts

finish the cut part then Sanding

Check the surface

doing Sanding part

This is the Result:)

i want to put some LED... and put it some white paint .. LED black light (or luminisce LED) to put a nice design finish xD

if you like my work progress ... comment it please

[Kuma Inu]

this is my first try...

but it broken...

im make other with black plastic

Sanding

this is where i put it.. ^^

y want to put a ultraviolet led, to given it a (WOW finish) paint with white

Finished it

[Kuma Inu]

Im making this only for fun... the drive... not work properly but i want to put some led, and when the "real" disk read data, this "disk" led-on.....

this is the disk

peel-off the sticker.

3. mark the cuts

cut! ... "chispas"

check...

sanding with the moto-tool

the work is not finished yet ... i need to resanding some parts and put acrylic ... and one led

[Kuma Inu]

I'm used "wood", to put hardness, I glued 3 layers. of it . i show the work...

1. the Material :

2.Cut the wood :

all part for all sides (3 sides ) front and back are in plastic (ENJOY!)

3.Glue it :

4.Waiting for the glue be dried:

4.]i'm using a old case(but only the mobo tray) :

The First Floor is almost finished only need to buy Golden bolts and brackets (<-"escuadras" - to put all in together)

thanks for view my progress