[Scratch Build] Project "illogical"

[flix29!]

Hey guys,

I want to introduce you my new project.

After building a few casemods in the last years I want to build a big scratch build.

I dont want to do any compromise, so this project will become very huge

I will use a lot of Aluminium and Copper

Hardware I will use:

- MOTHERBOARD: Asus Rampage IV Black Edition

- CPU: Intel i7-4960x

- VGA: actually i have 4x GTX 470 - I think I will replace them with some R9 290

- RAM: ???

- PSU: Lepa G 1600

Wasserkühlung:

- 2x Alphacool NexXxoS UT60 Full Copper 420mm

- 1x Alphacool NexXxoS UT60 Full Copper 560mm

- 2x Alphacool VPP655

- 11x Enermax UCTB14B

- EK-Supremacy Clean CSQ - Full Copper

- EK-FC R9-290X - Acetal + Backplate

- Bitspower BP-MBWP-C48 und BP-MBWP-C47

- 2x EK-RES X3 250

Big thanks to Enermax, Lepa and Aquatuning.

A first Sketch of what we will see here:

And I'm very proud to announce the first sponsors for this project:

Thank you

[flix29!]

First pics of progess:

Some sheets of metal I ordered, 1000x500x5mm, 1000x500x3mm, 1000x500x1mm perforated metal and 2x 1000x1000x1,5mm(not in the pic)

I cutted the 5mm sheet into shape (750x245mm)

After that i cutted some profiles:

My temporary router table :

milled the profiles

and cutted the other profiles:

I think I need to hurry up a little bit

[flix29!]

Yesterday wasnt a good modding day...

I want to assamble the profiles and the front and backplate. I need to drill some threads, but at the second hole the tap is broken...

Today I tried to be a little bit more productive.

I have finished the profiles for the corners.

fits really well

See you the next days

[flix29!]

hardware Update in the first Post

[flix29!]

The last days I was very busy couse of university.

I try to go on modding a little bit faster from now on

The profiles a screwed to the backplate but not to the frontplate.

I already orderd two R9 290 but the coil whine is so damn noisy...