demian71 Posted February 22, 2016 Share Posted February 22, 2016 I leave it to your judgment, my humble project "Mysterious aluminum." I do body from the wreckage of buildings of unknown origin. The housing will be for a compact gaming PC. Inside Established: Motherboard Foxconn H61S i7-3770 processor the video card Gigabyte GTX 560 Ti 1333 Kingston 8Gb memory CPU cooler radiator modified Ice Hammer and fan Cooler Master JetFlo 120 mm Red HDD WD blue 250Gb HDD Seagate 650Gb Power Supply OCZ 650W fan Thermaltake Luna 140mm Red Link to comment Share on other sites More sharing options...
demian71 Posted February 24, 2016 Author Share Posted February 24, 2016 ПоÑле окраÑки Ñ Ð½Ð°Ñ‡Ð°Ð» уÑтанавливать компоненты. Link to comment Share on other sites More sharing options...
demian71 Posted February 24, 2016 Author Share Posted February 24, 2016 During assembly, it became clear that the graphics card Palit GTX 660Ti does not want to run with the extension. It had to be replaced by Gigabyte GTX 560Ti. Link to comment Share on other sites More sharing options...
demian71 Posted February 25, 2016 Author Share Posted February 25, 2016 Cooler for CPU Ice Hammer has been renovated with the help of fan Cooler Master Jet-Flo 120 Red. Conducted trial testing. CPU without overclocking warmed program OCCT 4.4.1 to 62 ° at 100% load kernels. In the gaming benchmarks are not heated above 50 degrees Celsius. Fan from Cooler Master is very well fit into the design. Besides, it's very quiet. Link to comment Share on other sites More sharing options...
demian71 Posted February 29, 2016 Author Share Posted February 29, 2016 I continue. I installed the motherboard into the case and laid the cable. Test run in the shell. Link to comment Share on other sites More sharing options...
demian71 Posted February 29, 2016 Author Share Posted February 29, 2016 Everything turned out very compact. Top visible LED RGB lighting from the graphics card. Link to comment Share on other sites More sharing options...
demian71 Posted March 3, 2016 Author Share Posted March 3, 2016 I continue. To illuminate the graphics card stuck RGB LED backlight. Switch back and displayed through the three modes: red, blue and green. Link to comment Share on other sites More sharing options...
demian71 Posted March 3, 2016 Author Share Posted March 3, 2016 The metal frame was decorated with black acrylic 3 mm thick. On acrylic glued Car vinyl film with the effect of black liquor aluminum. All items are then cut to the laser machine. Gigabyte logo was removed from the old faulty graphics card. Personally, I think that the video card Gigabyte best quality and the ability to work in the most extreme conditions. Link to comment Share on other sites More sharing options...
demian71 Posted March 3, 2016 Author Share Posted March 3, 2016 The final photos. The project is a compact and unassuming on the budget. I did it for the younger son, and put all of their modest possibilities. Thank you all for your attention to my work. Feel free to ask questions if you are interested in more details. Link to comment Share on other sites More sharing options...
demian71 Posted March 25, 2016 Author Share Posted March 25, 2016 The computer was presented and installed. Son is very happy. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.