elite_ire Posted February 16, 2017 Share Posted February 16, 2017 So, not 100% sure what i'm going to do yet but i'm building a new pc using an old CM stacker 830, just entering for the fun defiantly way outclasses by competitors here i'm pretty much a noob when it comes to modding :). anyways less words more pics More to come ;D Link to comment Share on other sites More sharing options...
elite_ire Posted February 16, 2017 Author Share Posted February 16, 2017 the case : Link to comment Share on other sites More sharing options...
elite.ire Posted February 22, 2017 Share Posted February 22, 2017 more parts arrived :D, Link to comment Share on other sites More sharing options...
elite.ire Posted February 22, 2017 Share Posted February 22, 2017 all setup for initial testing :), went well although cpu voltage is a little on the high side. Runs at 5ghz anyways temps hit 80C tho, may try reseat the cpu block later and retest :). Anyone else testing a 7700k ?, what voltages was it taking to hit turbo (4.5ghz) on stock settings ?, mine was drawing around 1.265v at 4.5ghz :/ Link to comment Share on other sites More sharing options...
elite.ire Posted February 22, 2017 Share Posted February 22, 2017 took the case apart to get a better idea of what i'll be doing, will be moving the motherboard tray up a little, removing the cross support bar on one side, and moving it down on the other side and flipping it, will probably have the psu at the bottom. Not set on a psu location just yet. Think i might also make a new backplate for the case to replace the modular one. Will be cutting away some of the drive bay also so its not blocking the view through the mesh. Ordered a dremel :), always wanted one i guess now is the time to get one :D, will start further disassembling the case when it arrives, and cut away a few bits Link to comment Share on other sites More sharing options...
elite.ire Posted May 3, 2017 Share Posted May 3, 2017 final submission day sure crept up fast. I really haven't had the time i needed to spend on this project to get it where i wanted, but oh well, times up now xD here is the final pictures for mine, Will probably be taking it apart and rebuilding in the future with more watercooling parts and m.2 ssds, didn't get to mod the case much never got the dremel in the end Good luck to everyone participating , been interesting watching peoples builds take place Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.