Timpelay Posted September 21, 2022 Share Posted September 21, 2022 Absolutely stunning! And yes, I love the design hehe.. 1 Link to comment Share on other sites More sharing options...
Keir Graham Posted September 21, 2022 Author Share Posted September 21, 2022 And with the computer component tray installed: Its all a very tight fit, barely any spare space expect a bit on the left and right, there fittings were a pain to get on, but just about managed with some log pliers. My measurements of lining up the SLI waterblock extender fittings seems to have been spot on as well I've pressure tested the whole system without the pump and its all good thank god. I created some 3d print/foam spaces to fit between the heatsink and the fan housing to seal it to make sure the air only goes through the heatsinks: I then fully assembled the fan and mounted it in place: And stuck on some foam on the feet for vibration damping: Here's the pump all assembled: Pressure test time again I connected a res to the 2 inlet pipes to bleed the air. I can bend the tube to make it either go around the res more or the main system, it took a while, but got there eventually: 2 Link to comment Share on other sites More sharing options...
Keir Graham Posted September 21, 2022 Author Share Posted September 21, 2022 5 minutes ago, Timpelay said: Absolutely stunning! And yes, I love the design hehe.. Ah nice, seems we took similar inspiration and colour preference Link to comment Share on other sites More sharing options...
C0LLARD Posted September 22, 2022 Share Posted September 22, 2022 The level of technical engineering on this mod is from another level. This is really impressive. Link to comment Share on other sites More sharing options...
Keir Graham Posted September 22, 2022 Author Share Posted September 22, 2022 (edited) On 9/22/2022 at 11:30 AM, C0LLARD said: The level of technical engineering on this mod is from another level. This is really impressive. Thanks Here's the final results: Edited October 11, 2022 by Keir Graham Pics now have background Link to comment Share on other sites More sharing options...
Keir Graham Posted September 22, 2022 Author Share Posted September 22, 2022 (edited) And now with the LEDs on Edited October 11, 2022 by Keir Graham Pics now have backgrounds 2 Link to comment Share on other sites More sharing options...
Keir Graham Posted September 22, 2022 Author Share Posted September 22, 2022 (edited) Sorry about the quality of the pics, they seem to get compressed when I upload them Thermals wise it gets rather toasty under synthetic loads, the GPU is fine, but the CPU starts to throttle at 90c in this test. This is a worse case scenario though, and games wont utilise anywhere near 100% CPU. Even under VR stress on Half Life alyx the CPU ends up in the high 70s to low 80s without throttling, so I'll call it a win Edited September 22, 2022 by Keir Graham Link to comment Share on other sites More sharing options...
Guest GlennTop Posted October 19, 2022 Share Posted October 19, 2022 I promise you nothing. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now