daguar

preparation for posting photos of the final result.

preparation for posting photos of the final result

preparation for posting photos of the final result

Obstacles and problems that I have faced > I was the first time using plywood material to modify. and this made me find a lot of different characters with acrylic or aluminum materials. > The biggest obstacle is the inconsistent thickness of the plywood material, making it difficult for me to make joint holes between the parts to be joined together. > because I used a water-based dye, there was a slight expansion of the plywood material. this is a common thing. To prevent size deformation and mold growth on this plywood material, after being colored, it must be dried immediately. (in the sun or put in the dryer) > I often enjoy my work too much, so I forget and miss many things that need to be documented. all the documentation photos that I sent were just moments where I was remembering to do the documentation

Obstacles and problems that I have faced > Hardware : The modified PC design this time was originally made to suit the use of custom water cooling. But at the end, I didn't get anyone who wanted to sponsor me. because time is very limited, I can not perfectly redesign this modification. but the show must go on, by tricking the hardware layout, finally this project can be finished too. >This scratch build is made up of approximately 700 separate parts. and it often happens, I forget the arrangement, even though I drew it myself > I often enjoy my work too much, so I forget and miss many things that need to be documented. all the documentation photos that I sent were just moments where I was remembering to do the documentation

To give the plywood a bit of color, maximizing the use of environmentally friendly materials, I use thick tea leaves boiled water.

Obstacles and problems that I have faced > changing the size of the ATX casing to a smaller casing, so that the memory position on the mini ITX mainboard will touch the radiator fan. Using RAM memory that has a high heat spreader is almost impossible. The solution that can be done is to: 1. use ram memory which has a low heat spreader 2. replace the fan with a thinner one. 3. Shifting the mainboard holder on the casing so that it is lower > I often enjoy my work too much, so I forget and miss many things that need to be documented. all the documentation photos that I sent were just moments where I was remembering to do the documentation

cutting plywood with a laser cutting machine.

as usual before carrying out modification work, a lot of my time was consumed to do the design drawings

for CMWS2022 I also tried to follow the "non pc mod" category. I will make a mouse storage area so it doesn't get dusty when lying on the mouse pad. Until now I'm still confused about the mouse to be used. Maybe I'm using MM711 or CM310. But aesthetically it may be a bit disturbing. because the mouse uses a cable. It seems that using a wireless mouse would look better. The best choice is probably on the MM731. The design and philosophy of the chosen theme maybe a bit ordinary. because the processing time is very little. for this modification, I will make plywood as the main material. In summary, I combined Victorian chest style with Mecha legs from the future For additional materials, especially for accents, I will use a bit of PVC sheet. Even though this is my first time using plywood, I hope to present this work well. To maximize the use of easily recycled materials, for the final finishing layer, I used boiled tea leaves to give some color to the plywood layers. This plywood material is also an option because it wants to be included in the "Best Use Re useable Material Category"