-
Posts
41 -
Joined
-
Last visited
-
Days Won
1
Posts posted by ApocPony
-
-
-
A round of test fitting I actually managed to fit two 120mm AIO liquid coolers the H80 rad is just too cumbersome, and the tubing is way too stiff, I managed to get everything in including the water-cooled GPU and got it to post with no issue. That being said there was so much pressure on the GPU backplate I chose to pull it all out and order A 25mm radiator as 50mm is just too big.
-
-
-
-
Currently in the process of stripping and applying a patina to the exposed stripe of exposed metal post lasering, which will run parallel to the front\ mesh. This has been the most difficult so far there is no room for error. It's a process of tape, spray rinse repeat. If I'm not careful I'll damage the powder coating to either side. So far so good....
- 1
-
-
-
-
-
-
-
I really underestimated the paint job and steel treatment from Cooler Master, this took 3 rounds of paint stripper and wet sanding with 80 grit through till 1200 grit. I have just started to add a patina to the steel with a combo of vinegar, peroxide and salt I'll add photos to show how the patina progresses.
-
-
Hi everyone and thanks for stopping by to check out my build log.
I will be transforming the NR200p into a vertical tower encompassing elements of nature mixed with an industrial retro theme. I have just started stripping the case and ordering parts. This week I hope to start modifying the side and front panels and start drawing up designs for the top vent.
Parts that will be included in the build will be transferred from my old system.
-i5 6600k clocked at 4.8ghz
-16 gb ddr4 ram
-z170 motherboard
-1070 water cooled
-600-watt sfx PSU
I'm a bit late to the party but I'm really looking forward to how this evolves over the coming weeks.
All the best and looking forward to all you amazing builds!
Retro Rust (completed)
in 🖥️ Tower Mods
Posted
Breathing some new life into my old EVGA 1070 SC2, I have laser cut some cherry wood for test fitment, needs a stain and it should be good to go.