Samca Posted February 20, 2017 Share Posted February 20, 2017 Greetings! I'm SamCa, modder from Philippines. This will be my official entry for Cooler Master Case Mod World Series 2017 Scratch build categoryHuge thanks to EVGA for the support! I will be building project "Winged Victory of Mercy" The mod was inspired from the the greatest masterpiece of Hellenistic sculpture, Winged Victory of Samothrace... ....with a mix. The design will be combined with Angela Zeigler aka Mercy (from Overwatch). I decided to pick her because she perfectly fits as the "modern angel" of the mod. SPECS: Intel Core i7 6700EVGA Z270 FTW K EVGA GTX 1070 FTWEVGA 16GB DDR4-2666 EVGA SUPERNOVA G3 1000W COOLERMASTER MASTERFAN PRO 120 Western Digital 1TB BYSKI watercooling parts I modeled her into the looks of the statue and the planned scratch case. I will be using metal bars for it's base to support the motherboard, gpu, psu, rads ,reservoirs and specially the radiator . The Motherboard is placed below together with the reservoir and gpu. The storage devices and psu will be inside the body. (I will make a mechanism in which i could open the body to expose the storage parts and psu) the radiator is placed at the top as well the fans with it. The watercooling tubes will be sketched throughout the build. For the armor, I will be using fiberglass and resin. For the other details like the wings, i will be using acrylic sheets. Link to comment Share on other sites More sharing options...
Ale Modder Posted February 20, 2017 Share Posted February 20, 2017 Very interesting nice idea . I am following with interest Link to comment Share on other sites More sharing options...
Samca Posted February 21, 2017 Author Share Posted February 21, 2017 9 hours ago, Ale modder said: Very interesting nice idea . I am following with interest Thanks Link to comment Share on other sites More sharing options...
Samca Posted February 28, 2017 Author Share Posted February 28, 2017 Before anything else like the fiber-glass and resin. I need to make the paper model of the body for the base. I printed out the parts to be placed together. I used sketch-up, exported to obj, converted to pdo, and unfolded using pepakura. The cutting begins! I used my old good hot-glue and scissors for this process. It took me 6 hours to finish this upper half I finished the torso of the mod. next week I'll make the wings, the lower armor and the metal base for the parts to be placed inside. Around end of march I will start the fiber-glass and resin process. Stay tuned! Link to comment Share on other sites More sharing options...
Samca Posted March 13, 2017 Author Share Posted March 13, 2017 Almost there, finished the to-be-fiberglass parts. Checked the wings part if its size is proper for the radiator size(420mm) The other details like the feathers of the wings will be made from acrylic sheets (4mm-4.5mm) Link to comment Share on other sites More sharing options...
Samca Posted March 19, 2017 Author Share Posted March 19, 2017 Huge thanks to EVGA for the awesome support I will be using EVGA Z270 FTW K motherboard Link to comment Share on other sites More sharing options...
creative workshop Posted March 19, 2017 Share Posted March 19, 2017 Hey. You will also use a fiberglass matrix with resin, your layout? Link to comment Share on other sites More sharing options...
Samca Posted March 19, 2017 Author Share Posted March 19, 2017 1 hour ago, Белов Игорь said: Hey. You will also use a fiberglass matrix with resin, your layout? Yes finerglass cloth/mat eith polyester resin Link to comment Share on other sites More sharing options...
Samca Posted March 25, 2017 Author Share Posted March 25, 2017 I will be using EVGA GTX 1070 FTW graphics card Huge thanks to EVGA! Link to comment Share on other sites More sharing options...
Samca Posted March 30, 2017 Author Share Posted March 30, 2017 Time for fiberglass and resin. Video will be posted soon Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.