Matteo Costa Posted April 24, 2017 Author Share Posted April 24, 2017 After I was done with the painting it was assembly time! But first I had to cut out a hole in the bottom (and one on the top) to fit the radiator and actually be able to insert it in the case. Link to comment Share on other sites More sharing options...
Matteo Costa Posted April 24, 2017 Author Share Posted April 24, 2017 The water cooling loop is composed of two parts: one in acrilic tubes and the other made with soft tubes. The acrilic part of the loop is in the upper section of the case while the soft one is in the lower section connecting to the loop the pump and radiator. Plus in these photos you can see the new heatsink covers. They are 3D printed badges with my logo and the main sponsor's one. As they were printed with transparent PLA plastic the RGB light shines trought. I also 3d printed a new thin support for the pump, as the original one was too large to fit inside the psu cover of the mastercase. Link to comment Share on other sites More sharing options...
Matteo Costa Posted April 24, 2017 Author Share Posted April 24, 2017 Here's some more porn... Link to comment Share on other sites More sharing options...
Matteo Costa Posted April 24, 2017 Author Share Posted April 24, 2017 And more here... Link to comment Share on other sites More sharing options...
Matteo Costa Posted April 24, 2017 Author Share Posted April 24, 2017 The next step was to laser cut the logos and create a new side panel window cover with the "ONI" name on it. I decided to paint it matte black just to reduce the reflection with the red light on. Link to comment Share on other sites More sharing options...
Matteo Costa Posted April 24, 2017 Author Share Posted April 24, 2017 And here are the logos of the sponsorssss.... so cute, I love them. I painted them with ink (only on top) Link to comment Share on other sites More sharing options...
Matteo Costa Posted April 24, 2017 Author Share Posted April 24, 2017 Here are some details for you... Ah yes! I almost forgot... also the cable combs are 3D printed Link to comment Share on other sites More sharing options...
Matteo Costa Posted April 25, 2017 Author Share Posted April 25, 2017 And last but not least here are some photos I took at the Microsoft House event I was invited alongside my sponsors It was so much fun, and I really loved showing this project to the public for the first tyime in it's "final" form Link to comment Share on other sites More sharing options...
Matteo Costa Posted April 25, 2017 Author Share Posted April 25, 2017 The best part of the day was when I found Kelly Hill Tone staring at the mod before her dj-set... Obviously, Mr. "Oni" asked me to take a picture of them both together... How could I tell him NO? Link to comment Share on other sites More sharing options...
Matteo Costa Posted April 25, 2017 Author Share Posted April 25, 2017 And all of a sudden came Tracer to take a photo with mister Oni... Revealing her secret deep love for the mod <3 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.