Ferrari Project

[Sa mod]

I started to work on the side panel and first I created paper template.

 

 

Now I cut the leather and I did the stitchings.

 

 

 

 

 

I glued the leather and I trimmed the edges.

 

 

[Sa mod]

Now I created cover psu in plexiglass.

 

 

After I created  paper template and I added a thick.

 

I cut the leather, I did the stitchings and I glued the leather.

I added particular details of leather.

 

 

 

 

I attached a laser plexiglass writing.

 

[Sa mod]

Now I started to work on the internal panel.

I assembled motherboard Asus x470 strix, cpu and gpu waterblock Alphacool, ssd S3+ and ram S3+.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[Sa mod]

Now I created paper template and I cut plexiglass.

 

 

 

 

I did holes for cables and I started  to bend tubes, I took measurements to do holes for passthroug and I did them.

 

 

 

 

 

 

I finished to prepare tubes of the front part and I fixed reservoir.

 

 

 

 

At this point, I did also the back tubes.

 

[Sa mod]

Now I disassembled and I started to apply the leather on the panel.

I glued the leather and I trimmed the edges.

 

 

 

I did details for holes.

 

This is the finished work of pc interior design.

I created also a little panel to cover cables .

 

 

[Sa mod]

Now I assembled all again.

[Sa mod]

I added plexiglass details.

 

 

 

 

 

 

 

 

 

 

 

[Sa mod]

Now I did cables management.

 

 

 

 

I filled loop.

 

 

[Sa mod]

These are finally photos ......stay tuned for final video.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[Sa mod]