scratch build AL 26.982 scratch build mod

[mayhem modz]

hi guys, I'm very happy to participate in the cmws22 competition again this year, they presented a scratch build, the work will be carried out without the use of complex machinery and most of the work will be done manually.

the theme is aluminum, AL 26.982 is the atomic weight of this perfect material for this mod, it would seem that the aluminum metal will be in large quantities ... no but I will try to give the idea of it with the plexigrass and special paints ... I will try to save as much as possible on materials .. thanks but let's start immediately ..

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Edited December 8, 2022 by mayhem modz

[mayhem modz]

let's start ... Aluminum strips and cluttering management ..

 

 

 

Cut the strips at length of 50 cm

 

 

 

 

Here is the base .. 50 cm x 23 cm there's enough space for everything ..

 

[mayhem modz]

Basic consolidation and support for fixing the front panels (tank) and rear Technical tests

 

 

 

 

 

The front panel will be a tank (it is the first time I realize it we hope ...) that in addition to being a hrdware part for cooling it will be part of the structure in the case ..

 

 

 

 

 

 

 

Test ... view from below

 

 

still have to create the upper cover with supports that will hold the side panels for anchored to the structure An insertion of 2 vertical plates 1 for the motherboard and another for coverage - LEDS logos etc will give greater stability to everything ..

 

[mayhem modz]

My modest opinion is that when you realize this type of projects especially without machines,
you have to leave very well because everything you will be created later will be leaning on the basis Realization of the upper structural support panel,
almost identical to the lower one but with only 2 hubs to keep the structure tightly, the radiator and fans will be fixed on this panel

 

 

back, these 3 panels of 4 mm each will have worked later

 

 

Assembly with temporary screws

 

 

test, the front panel that will be a tank, this too will be shaped later, the important thing is to build the stable structure.

 

 

 

Preparation of the base that will contain various cables, and on which it will pogge power supply and supports for the motherboard

 

 

The aluminum strips were shaped to the mm to perfectly coincide with the supports previously made in the case.

 

 

 

 

Upper panel that will be well fixed to the aluminum structure, and where I will also make holes and openings to fix radiator and fans, other higher panels will be built followed + other fronts

 

[诺]

加油

[E x e]

Cool project

[mayhem modz]

 

The front panel is as important as the alloy wheels for a used car ... I realize supports with "U" aluminum profiles these will support in transparent acrylic panel So signed by hand and we leave ...

 

 

They will still have to be well finished but the base is ..

 

 

 

 

 

will be fixed with m3 screws on the tank and on the chassis .. that's why it was so important to start well with the base ...

 

 

[mayhem modz]

Completion of the Motherboard Tray which is integrated into the case making everything much more stable, the panels are 2,
spaced of 2 cm to welcome the cables and more .. And in turn use them as a base to add other LED panels and logos ..
Low back fixing and above all very stable

 

 

 

 

 

Here is the assembly of the structure

 

 

 

 

 

 

 

 

 

 

 

 

 

it will seem little but SOO this has requested a lot of work around 2 days next step ... this ....
burst on the posterior panel for the power supply ..

 

[mayhem modz]

Working at the back panel

 

 

 

 

 

 

 

 

done...

 

[mayhem modz]

building a psu cover with 45° gpu support