mcj66106 Posted February 22, 2011 Posted February 22, 2011 My mod will be based on the Cooler Master HAF 932.
mcj66106 Posted February 22, 2011 Author Posted February 22, 2011 Case mods will include inverted MB, side panel window, redesigned front panel and new top panel all fabricated from 6061 T6 aluminum. More mods to be announced at a later date. Hardware list. MB ASUS Rampage III Extreme CPU i7 920 PSU Corsair HX1000 Video card Evga GTX580 Sound Blaster X-Fi Titanium Fatal1ty Ram Corsair Dominator GT 2000 6Gb HDD 1Tb Barracuda SSD Corsair X128 Tygon R3400 1/2in. ID 3/4in. OD HK 3.0 RRT chrome plated aquagraFX GTX 580 2x Thermochill TA120.3 12x Bitspower True Brass 1/2in. Compression Fittings for 3/4in. OD 3x Bitspower G1/4 True Brass Male to Male 2x Bitspower Matt Black Rotary 45 EK-Multioption RES X2 - 150 Advanced 1x D5 pump 1x Bitspower D5 MOD TOP V2 (Acrylic Version) With UV-Reactive Blue O-ring 1x Silver KillCoils by iandh
PaPang Posted March 5, 2011 Posted March 5, 2011 Hi mcj! Have I seen you at OCN? Will keep an eye on your build. Lots of luck! Cheers and Saludos
FrenkieNL Posted March 5, 2011 Posted March 5, 2011 This is internal hardware only, or are you going to make some rad changes to this boring case ?
mcj66106 Posted March 8, 2011 Author Posted March 8, 2011 Im just getting the hardware together at this point. There will be many more mods to the case as well as the hardware. To start the mother board will be inverted. The next step will be to construct a new front panel and top. Then it will be time for the more creative stuff. Right now every thing is on hold. The new ram should be delivered around 3p.m. today. So I should be working on the new front panel and top tonight and the next few days.
mcj66106 Posted May 5, 2011 Author Posted May 5, 2011 Small Update. This is how it sits right now. Added drain line and corsair X128 SSD Tonight I will be ordering a new 250 Advanced res because the one I have now just doesn't look right. Also on that order will be a bunch of BP brass couplers to replace the tygon tubing going from the res to the acrylic T block. I will also be adding a fill line from the fill port on the top of the case to the new res. There is still a lot to do but I think it has come a long way. It still needs the front panel made and all of it still needs a good cleaning and powder coating.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.