Dave2010 Posted October 15, 2013 Share Posted October 15, 2013 Hello guys, I propose on the modder square, a new project: CM Cosmos II Modern. The title leaves already imagine the style of the mod, which will be precisely a modern and current. With the success of the Glass & Steel 600T, I hope that this Cosmos II can collect even more favorable opinions! I hope to get better again and increase my level. Now, after these lines too many series for me, let's get down to business. In the search for sponsors, I run into Cooler Master to request a power supply. Well, I make it short. To the question: ok for the power supply, but how about making a mod on a Cosmos II? My answer is found in the pictures that follow. The characteristic color of the mod will prevail blue and gray, with some flash in black to complete the whole. Now just words, we start with a list of sponsor logos that will participate in the MOD: two I can reveal them immediately, for others ... you have to wait for the right moment. I thank Massimo D'Errico, owner of PcHunter, who helped me in the intermediation with CM and will support ... bah, do not say anything, suspence... SPONSOR PcHunter TechArena MSI Tecno Computer Italia Bitspower E22 Cooler Master Kingston Aquacomputer Aquatuning Corsair ...in progress... Stay tuned, tomorrow I'll put a lot of interesting photos!! Link to comment Share on other sites More sharing options...
Dave2010 Posted October 15, 2013 Author Share Posted October 15, 2013 Take a seat, and let's see the monster!! Link to comment Share on other sites More sharing options...
Dave2010 Posted October 15, 2013 Author Share Posted October 15, 2013 Let's work on it!!! I removed all the internal parts, to...you must wait to know it! Link to comment Share on other sites More sharing options...
Dave2010 Posted October 15, 2013 Author Share Posted October 15, 2013 Well, for now, the works are still dismantling of the case, as I'm still waiting for the motherboard to be able to take definitive measures to 100% without errors. Meanwhile, however, do not leave you high and dry and start to show you some very interesting parts. A big thank to Kingston for giving me this SSD, 120GB HyperX 3K and this kit of RAM, 2x4GB, 2400 MHz HyperX Predator. And now, pictures! Link to comment Share on other sites More sharing options...
Dave2010 Posted October 15, 2013 Author Share Posted October 15, 2013 Here, I reveal some other very interesting arrival. Thank Aquacomputer for the special agreement and all this good God In the box there are: Aquaero 5 XT, version 2 poweradjust ultra waterblock Aquaero two flow sensors, two temperature sensors, 1/4 G, two filters Aquacomputer classic, plus all the cables needed for the connections. If you have any questions, shoot as well! Link to comment Share on other sites More sharing options...
Dave2010 Posted October 15, 2013 Author Share Posted October 15, 2013 Good evening guys, the works are stop at the moment, because of my work. But, I can show you what I receive from Aquatuning!!! Thank you very much!! A Phobya G-Changer 480, Phobya G-Changer 360 and two Laing DCC500 1T Plus. Because of the two pumps, you can guess that I'll make two loops...follow me... See you soon!! Link to comment Share on other sites More sharing options...
Dave2010 Posted October 15, 2013 Author Share Posted October 15, 2013 A big THANKS to PcHunter for this beatiful motherboard!!! Link to comment Share on other sites More sharing options...
Dave2010 Posted October 15, 2013 Author Share Posted October 15, 2013 Hi guys! I add another piece of the components, a big piece. Thanks a lot to Cooler Master, that provide me this beatiful power supply. Link to comment Share on other sites More sharing options...
Dave2010 Posted October 15, 2013 Author Share Posted October 15, 2013 I'm back. Unfortunately, in recent weeks I'm overloaded with work and free time is nothing. Adding the fact that we are looking for an house, bye bye weekend. However, there is a but, I have a clear idea about the internal positions of the components. I'm currently designing the internal structure, for the fixing of the various components. The idea is to do everything by hand, with black brushed aluminum. The fact is that now it's difficult to be found, the AC Ryan has started to do other, and do not know where to turn. I have a contact with a friend, that should give me the panels, then cut out completely to my liking, from which I am waiting for news, but it should be all for the better. If you were to go wrong, I make the panels with inox laser cutted. The fact is that for the project I have in mind the ideal and also what I want and I do not accept compromises, is brushed black aluminum. I did not even consider the speech to paint. This time I want to do something totally clean and targeted elegance and simplicity. This is the layout I have in mind now. Tell me also if you jump out errors or have suggestions for improvements. All this was done in English for a reason, you'll see in the future. Maybe if someone does not remember, the loop will consist of transparent rigid pipes E22, which I have already purchased. A loop with additive blue and the other with gray additive. Link to comment Share on other sites More sharing options...
Dave2010 Posted October 15, 2013 Author Share Posted October 15, 2013 I'm back folks, I recovered. Since the speech aluminum stalled for some time, I proceeded to design the whole thing in steel. I will spare you the tables of the various panels in 2D because soon you will see them realized. We begin with an overview of the various pieces that I designed and made to realize laser. Support for radiator 480 2 mm thick. The radiator accommodated in the front area with fans in mining, placed inside, attached to the radiator. I was thinking of a small conveyor plexi, perhaps to illuminate. The triangle above has been obtained to be able to see the logo Phobya, not for a specific reason, but because I like it. The piece will be fixed so as you see it, anchoring it with the part below the bottom of the case. Rear Panels These two panels will be placed in the rear of the cabinet, where there is currently preparing for the 140 mm fan. The latter will be present throughout sdremellato to leave only the little frame side where I will set these two panels, one inside and one outside. The internal one has a thickness of 1 mm (right panel) and the external instead (left panel) has a thickness of 2 mm, because as noted ... I'll have to hold the power supply, mounted vertically with connections to the inside and the side with the switch and the connector 230 V fixed on the panel. 360 mm radiator grill 1 mm thick, is placed above the radiator fans: the latter will be positioned on top of the case, with extraction fans in inland homes. Support SSD Consists of two pieces, 1.5 mm thick, will be assembled as you can see in the second picture, and placed vertically as you see the last one, with the visible side anchored to another panel that we will see later. The SSD will be set using the holes of the same, using the screw holes on the side that I have prepared. The pieces are a little 'dirty, tomorrow I will take to clean them well and proceed to the early stages of working to integrate them. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.