D0liveira Posted December 16, 2022 Author Share Posted December 16, 2022 Continuing with the construction, after painting the upper cover, I cut the aluminum screens following the same cutting direction to create symmetry and glued them with Araldite. This glue is perfect because there was no space to screw and it glues all kinds of material. Link to comment Share on other sites More sharing options...
D0liveira Posted December 16, 2022 Author Share Posted December 16, 2022 As I had pre-assembled the hardware on the ship before painting, I chose to install the Windows 10 operating system before assembling the hardware permanently on the ship. Before that I updated the BIOS and configured the SSD's. Link to comment Share on other sites More sharing options...
D0liveira Posted December 16, 2022 Author Share Posted December 16, 2022 In this assembly step, the first process was to cut and install the aluminum screen in all the air passages of the fans. After that, the mobo tray, motherboard, Water Cooler and Source radiator were fixed. I turned on the project for the first time and the result already appeared and it made me cry with joy because it was very close to the end. Link to comment Share on other sites More sharing options...
D0liveira Posted December 16, 2022 Author Share Posted December 16, 2022 In this process I adjusted the shock absorber supports of the base of the ship and screwed them. The chosen locations were designed in such a way that the ship was in perfect balance and that there was no risk of falling. In this chosen position, you can still move the ship and choose different "flight" and "landing" positions. Link to comment Share on other sites More sharing options...
D0liveira Posted December 16, 2022 Author Share Posted December 16, 2022 I placed the screen in the interior of the ship to have space to store the cables and better organize the interior of the project. The ARGB light effect that is superimposed on these screens makes the lighting stand out. Link to comment Share on other sites More sharing options...
D0liveira Posted December 16, 2022 Author Share Posted December 16, 2022 And here is the assembled ship, just a few external and internal details to post the final photos with all the details and delivery of the project. Don't miss it! Link to comment Share on other sites More sharing options...
D0liveira Posted December 18, 2022 Author Share Posted December 18, 2022 And here are some more complementary photos before the final assembly. Link to comment Share on other sites More sharing options...
D0liveira Posted December 18, 2022 Author Share Posted December 18, 2022 Link to comment Share on other sites More sharing options...
D0liveira Posted December 18, 2022 Author Share Posted December 18, 2022 I was connecting the project through the motherboard button, but I preferred to take a button and solder it with the 2-pin cable and put it in a hidden place. Link to comment Share on other sites More sharing options...
D0liveira Posted December 18, 2022 Author Share Posted December 18, 2022 To create something different in the project's lighting, I took a blue Neon Led Strip from my automotive workshop and attached it to the lid. This tape serves as a finish on vehicle panels, and the finish I brought to the ship was excellent. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now