�O�HotRod��o

[ArgOs]

You said it, PaPang. Thank you

this weekend I will upgrade.

[ArgOs]

I pop rivets to attach the fender, then I sand it.

my new acquisition, a fan CooleMaster Megaflow.

cut for the wheel.

I prepare the sheet, sanding it.

I put the putty.

paint the front.

[ArgOs]

Continuing with my solitary work, Inside the fender, I placed a plate for better viewing and will pass putty for details..

Then I paint with primer.

I pass sandpaper the to the other parts to pass after priming.

The front and the air intake.

I reinforced the top, I will pass the sandpaper and putty, then put the air intake and putty.

I cut to the air intake.

Then I reinforced the bottom and I made ​​some cuts.

And finally I started to paint some parts.

Thanks for your feedback.

[Tortured_soul]

wow, its beatyfull, excelent design.

[ArgOs]

Tortured_soul thank you master.

After the primer was sanded the surface to match it.

Place a plate on her side, and you will see in the future.

Then everything was painted shiny black.

the hinge and silver color foot.

Pictures of the progress of the painting.

I cut the side to match the inclination of the case.

Thanks to all for the comments.

[FrenkieNL]

Nice design, looks really promising. Keep it up man !

[ArgOs]

Thank you master.

The side ready.

I use a part that I cut the case, to create the side support.

I will attach the hinge to the Side. As you will see there is much dust in my garage.

I put a rubber at the foot, between the steel sheet and foot, other rubber will go under.

I created the mesh brackets

I painted pop rivets.

[ArgOs]

I hope to finish it takes very little time and I still have not finished the work.

Computer hardware.

The Support for HD

I begin to put the hardware in their place.

Other changes in progress. The filter of the air intake.

[PaPang]

OMG Argos, just like I said, it is soooo hard to see detail on a black mod, specially with a black interior too.

I see the work on the slanted side cover, factory made look like you said. You do need a good wire management job to make us proud. The grill is +1A!

I don't like to rush you but there is just a couple of more days left, so no sleep for you, hehe.

Cheers and Saludos

[ArgOs]

Thank you very much PaPang, I'm fighting against time and I will order the wiring.

I will finish it Sunday.

I show you a detail of HD support.

The wheel clock

I completely disarmed.

Electronic circuit.

I cut the tires well

and the fan

I cut inside the tire and the fan

Put in place.