Jump to content

Scratch Build : L3p D3sk - Small update :P 15-7


Peter Brands

Recommended Posts

Been playing with a lot of stuff this weekend ;)

Testing with the 2 (3) PSU's

Total of 2600W running now.

And off course my 3.3V 5V and 12V are superb now :)

Very silent psu's by the way !

P1060134%20%5B550x%5D.JPG

Even under full stress :)

980x @ 4.5 Ghz + 2 x GTX580 @ 960/1150

P1060136%20%5B550x%5D.JPG

And creativity with Bitspower on a Sunday afternoon :D

It was to see the effect of flowing Acid green right under UV leds in the desk.

(For further plans ;) )

P1060146%20%5B550x%5D.JPG

Link to comment
Share on other sites

  • Replies 113
  • Created
  • Last Reply

Needed for the Coolermaster PSU's

P1060168%20%5B550x%5D.JPG

After the mouse i was looking for a fitting mousepad for the desk.

Personally i like cloth pads like the Q-pad.

Couldn't find anything at all.

All i could find was a pad with leds in it.

But then the idea popped up ..

Still had some plexi somewhere, and there are 150 UV smd leds in my desk so why not try it :P

The plex.

(Fits perfectly !)

P1060169%20%5B550x%5D.JPG

The "hard" SLI connector.

P1060170%20%5B550x%5D.JPG

And my RVS cupholder :)

P1060171%20%5B550x%5D.JPG

P1060172%20%5B550x%5D.JPG

With a jigsaw.

P1060177%20%5B550x%5D.JPG

Maybe im going to let the print melt down into the plexi with its pins

P1060182%20%5B550x%5D.JPG

The Q-Plex :)

P1060184%20%5B550x%5D.JPG

P1060185%20%5B550x%5D.JPG

And the ...ehm ..cupholder :)

P1060186%20%5B550x%5D.JPG

Still goin to polish them some more later.

P1060187%20%5B550x%5D.JPG

Link to comment
Share on other sites

  • 2 weeks later...

Still had to change some things under my floor.

Today i found some time.

Had to replace some fans on my rad for Scythe GT's

Replaced the green tube for Tygon black.

Also replaced the 3 remaining GT's in my desk for green Nanoxia's

P1060254%20%5B550x%5D.JPG

GT's out

P1060255%20%5B550x%5D.JPG

Only 5cm space for my hand.

P1060256%20%5B550x%5D.JPG

Nanoxia's in.

P1060257%20%5B550x%5D.JPG

Here my radiator in the distance.

P1060262%20%5B550x%5D.JPG

On request also made a little movie of my trip :)

Mobile doesn't work here, but baby phone works fine :D

P1060263%20%5B550x%5D.JPG

De GT's on their place and tubes replaced !

P1060267%20%5B550x%5D.JPG

P1060268%20%5B550x%5D.JPG

P1060273%20%5B550x%5D.JPG

And another small test.

Wanted to know what stuff goes trough my loop.

This way it was easy to discover.

P1060279%20%5B550x%5D.JPG

Click it between my tubes and enable the pumps for one hour.

P1060305%20%5B550x%5D.JPG

Then disconnect the filter while pumping and stop the pumps as fast as you can.

This is so the dirt really stays in the filter.

P1060307%20%5B550x%5D.JPG

All tiny hairs and wtf, even a piece of my sigarettes :P

P1060313%20%5B550x%5D.JPG

Till next time :P

Link to comment
Share on other sites

Received a nice UV led board today.

It's specially for making photo's from UV-active parts.

You can only use it for 5 minutes per time, else it gets too hot :)

P1060362%20%5B550x%5D.JPG

P1060363%20%5B550x%5D.JPG

Small surprise between the UV leds :)

P1060364%20%5B550x%5D.JPG

And some pictures with the effect

P1060374%20%5B550x%5D.JPG

P1060380%20%5B550x%5D.JPG

P1060386%20%5B550x%5D.JPG

P1060399%20%5B550x%5D.JPG

P1060401%20%5B550x%5D.JPG

P1060402%20%5B550x%5D.JPG

P1060405%20%5B550x%5D.JPG

P1060406%20%5B550x%5D.JPG

Link to comment
Share on other sites

The date for powder-coating the desk has set !

Next week Tuesday ill bring it over there :P

10 minutes before unplugging it

P1060608%20%5B550x%5D.JPG

And 3 hours later :)

P1060616%20%5B550x%5D.JPG

Also took me half an hour to think how i will place the second PSU.

Decided to place them like this, ill creata another 120mm fanhole between the psu's tomorrow

P1060620%20%5B550x%5D.JPG

Wanted to use these for my quick connectors outside the desk

P1060420%20%5B550x%5D.JPG

P1060423%20%5B550x%5D.JPG

Maybe till tomorrow :P

Link to comment
Share on other sites

Yesterday the idea came up for hiding my cables from the 3 screens.

P1060621%20%5B550x%5D.JPG

Some won't like it, but for me this works great since my pc is more open then closed :P

So this way it's very easy to take away the backplates.

P1060623%20%5B550x%5D.JPG

It's only connected with the left side of the panel.

P1060627%20%5B550x%5D.JPG

2 hours later it was really empty, looks like a reverse buildlog :(

P1060628%20%5B550x%5D.JPG

Sanding it some.

P1060629%20%5B550x%5D.JPG

P1060630%20%5B550x%5D.JPG

Like a bomb exploded.

P1060631%20%5B550x%5D.JPG

Here i was finished for today :)

P1060634%20%5B550x%5D.JPG

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..